PRODUCT INFORMATION
Product Overview
The General Electric IC660EBD100 is an 8-circuit AC electronic assembly for the Genius I/O series. This block operates on a single power source ranging from 93 to 132 Volts AC. Nominal operating voltage is 115 Volts AC at a frequency of 47 to 63 Hertz. The module provides block to block isolation rated at 1500 Volts.
Each of the eight circuits can be configured for input and output operation. The assembly functions as an input-only, output-only, or mixed input and output block. It transmits one byte of data and receives one byte of data per bus scan. Standby power consumption equals 8.5 Watts when all I/O circuits are switched off.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Block to Block Isolation | 1500 V |
|---|
| Frequency | 47 to 63 Hz |
|---|
| Heat Dissipation | 16 W with 8 inputs |
|---|
| Operating Temperature | 0 to 60 degrees Celsius |
|---|
| Operating Voltage | 93 to 132 V AC |
|---|
| Power Supply Dropout Time | 1 cycle (16.7 mS at 60 Hertz or 20 mS at 50 Hertz |
|---|
| Product Line | Genius I-O |
|---|
| Size | 8.83 x 3.50 x 3.94 inches |
|---|
| Standby Power | 8.5 Watts |
|---|
| Storage Temperature | -40 to 100 degrees Celsius |
|---|
| Weight | 2.88 lbs (1.30 kg) |
|---|
TECHNICAL INFORMATION
Features
- Provides eight configurable circuits operating at 115 Volts AC nominal.
- Supports flexible setup as an input-only, output-only, or mixed I/O block.
- Includes individual circuit status LEDs indicating threshold voltage presence or commanded output states.
- Features 1500 Volts block to block electrical isolation.
- Exchanges one byte of data in both directions during each bus scan.
TECHNICAL INFORMATION
Applications
- Discrete AC signal interfacing within General Electric Genius I/O network architectures.
- Control and monitoring of 115 Volts AC industrial field devices.
TECHNICAL INFORMATION
Connections / Interfaces
- Connects to the Genius I/O serial communication bus.
- Provides terminal connections for eight discrete AC circuits.
TECHNICAL INFORMATION
Installation Guidelines
- Maintain ambient operating temperatures between 0 and 60 degrees Celsius.
- Verify supply voltage remains within the specified 93 to 132 Volts AC range.
TECHNICAL INFORMATION
Configuration Guidelines
- Configure individual circuits as inputs or outputs using the system controller.
- Confirm input devices maintain a threshold voltage of at least 60 Volts RMS.
TECHNICAL INFORMATION
Compatibility
- Compatible with General Electric Genius I/O communication networks and terminal assemblies.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSCompatible with General Electric Genius I/O communication networks and terminal assemblies.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the operating voltage range for the IC660EBD100?
The IC660EBD100 operates on a single AC power source from 93 to 132 Volts AC.
How can the circuits on the IC660EBD100 be configured?
The eight circuits can be configured as inputs, outputs, or a combination of both.
What does each circuit LED indicate on the assembly?
An input LED shows threshold voltage presence, while an output LED indicates CPU command status.
What is the reference price for the IC660EBD100?
Observed market reference pricing is approximately 179.00 USD for used units. This figure is an indicative reference price only and is not a final quotation.
