PRODUCT INFORMATION
Product Overview
The General Electric IC200UDR040 is a VersaMax controller designed for industrial logic automation projects. This 40-point unit operates using a nominal 24VDC power supply voltage. It executes discrete logic control with real-time processing capabilities. The unit provides integrated processing to coordinate connected industrial automation hardware.
The IC200UDR040 includes 24 digital inputs that support positive and negative logic wiring configurations. These inputs interface directly with discrete field sensors and switching devices. The unit also incorporates 16 normally-open relay outputs for direct load switching. The assembled controller has a total physical weight of 2.19 lbs (0.99 kg).
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Weight | 2.19 lbs (0.99 kg) |
|---|
| PLC Type | 40-Point PLC |
|---|
| Input Voltage | 24VDC |
|---|
| Input Count | 24 Digital Inputs |
|---|
| Output Type | Normally-Open Relay Outputs |
|---|
| Output Count | 16 Outputs |
|---|
| Input Type | Positive/Negative Logic Inputs |
|---|
| Power Supply Voltage | 24VDC |
|---|
TECHNICAL INFORMATION
Features
- Integrated 40-point programmable logic controller design.
- Operates from a nominal 24VDC power supply voltage.
- Includes 24 digital inputs supporting positive and negative logic configurations.
- Provides 16 normally-open relay output circuits for load switching.
- Total physical weight of 2.19 lbs (0.99 kg).
TECHNICAL INFORMATION
Applications
- Discrete machine logic control using integrated inputs and relay outputs.
- Sensor and switch monitoring through configurable positive or negative digital inputs.
- External electrical load switching using 16 normally-open relay contact circuits.
TECHNICAL INFORMATION
Connections / Interfaces
- Dedicated power terminal connections for 24VDC supply voltage.
- Discrete field wiring terminals for 24 positive or negative digital inputs.
- Output terminal contact points for 16 normally-open relay circuits.
TECHNICAL INFORMATION
Installation Guidelines
- Mount the controller inside a clean, protective industrial enclosure.
- Verify correct 24VDC power polarity before energizing the device.
- Wire field devices according to chosen positive or negative input logic.
TECHNICAL INFORMATION
Configuration Guidelines
- Configure digital inputs for positive or negative logic operation during setup.
- Confirm connected relay contact loads remain within specified operational limits.
TECHNICAL INFORMATION
Compatibility
- Integrates into General Electric VersaMax micro PLC control architectures.
- Accepts standard 24VDC digital field sensors and contact switches.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSIntegrates into General Electric VersaMax micro PLC control architectures. Accepts standard 24VDC digital field sensors and contact switches.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the input and output capacity of the IC200UDR040 controller?
The IC200UDR040 provides 24 digital inputs and 16 normally-open relay outputs, totaling 40 I/O points.
What power supply voltage does the IC200UDR040 require?
The General Electric IC200UDR040 operates on a nominal 24VDC power supply voltage.
Can the IC200UDR040 accept positive and negative logic inputs?
Yes, the 24 digital inputs support both positive and negative logic field wiring configurations.
What is the weight of the IC200UDR040 controller?
The IC200UDR040 controller has a specified physical weight of 2.19 lbs (0.99 kg).
