PRODUCT INFORMATION
Product Overview
The General Electric IC693CPU341 is a modular single-slot Processor Module designed for Series 90-30 programmable logic controllers. It operates on an 80C188XL processor running at a clock speed of 20 MHz. The unit delivers a Boolean execution speed of 0.3 milliseconds per 1K of logic. It features 80 kilobytes of user memory to handle medium control applications. The module installs into slot 1 of any standard baseplate system.
This processor supports 512 discrete inputs, 512 discrete outputs, 1024 analog input words, and 256 analog output words. It manages 9999 words of register memory along with more than 2000 timers and counters. Hardware revision IC693CPU341-J with firmware release 4.61 supports RAM and optional Flash memory. The module draws 490 mA from the 5 VDC power supply. The operating ambient temperature ranges from 0 to 60 degrees Celsius.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Weight | 1.50 lbs (0.68 kg) |
|---|
| Product Description | Modular CPU |
|---|
| User memory | 80 Kbytes |
|---|
| Clock speed | 20 Megahertz |
|---|
| Processor type | 80188 |
|---|
| Typical scan rate | 0.3 ms per 1K of Boolean logic |
|---|
| No. of supported baseplates | Five (5) |
|---|
| Microprocessor | 90C188XL |
|---|
| Processor speeds | 20 MHz |
|---|
| Voltage input | 5 Volts DC |
|---|
| Expandable | Yes |
|---|
| Current draw | 490 milliamps |
|---|
| No. of extension baseplates | Four (4) expansion baseplate; Four (4) Remote I/O baseplate |
|---|
| Boolean Execution speed | 0.3 ms per 1K logic |
|---|
| Register memory | 9999 words |
|---|
| Discrete Input Points - %I | 512 |
|---|
| Timers / Counters | > 2000 |
|---|
| Serial port | 1 |
|---|
| Discrete Output Points - %Q | 512 |
|---|
| Communication Ports | One (1) SNP Ports hosted by the Power Supply module |
|---|
| Analog Inputs - %AI | 1024 Words |
|---|
| Interrupts | Yes |
|---|
| Analog Outputs - %AQ | 256 Words |
|---|
| Shift register | Yes |
|---|
| Built-in Serial Ports | 1 (uses connector on PLC power supply). Supports SNP slave and SNP-X slave protocols |
|---|
| Current load | 490 mA |
|---|
| Bus voltage | +5VDC |
|---|
TECHNICAL INFORMATION
Features
- Clocked at 20 MHz using an 80C188XL processor architecture.
- Executes Boolean logic instructions at 0.3 ms per 1K of contacts.
- Provides 80 KB of internal user memory capacity.
- Controls 512 discrete inputs and 512 discrete outputs.
- Addresses 1024 analog input words and 256 analog output words.
- Allocates 9999 words of dedicated %R register memory.
- Supports over 2000 timers, counters, interrupts, and shift registers.
- Expands across up to five total baseplates per system rack configuration.
TECHNICAL INFORMATION
Applications
- Series 90-30 PLC rack processing architectures.
- Industrial automation machines requiring discrete and analog sequence control.
- Multi-rack expansion systems utilizing expansion and remote I/O baseplates.
TECHNICAL INFORMATION
Connections / Interfaces
- Integrated serial port routes through the connector hosted on the PLC power supply.
- Supports SNP slave and SNP-X slave serial communication protocols.
- Compatible with optional Ethernet, FIP, Profibus, GBC, GCM, and GCM+ modules.
TECHNICAL INFORMATION
Installation Guidelines
- Install the processor module directly into slot 1 of the CPU baseplate.
- Do not place non-CPU module types into slot 1.
- Maintain an operating ambient temperature between 0 and 60 degrees Celsius.
TECHNICAL INFORMATION
Configuration Guidelines
- Allocate system memory ranges for up to 9999 register words.
- Configure up to four additional expansion or remote baseplates.
- Hardware version IC693CPU341-J and firmware 4.61 configure with RAM and optional Flash.
TECHNICAL INFORMATION
Compatibility
- General Electric Series 90-30 modular baseplates and power supplies.
- Supports Ethernet, FIP, Profibus, GBC, and GCM communication option modules.
- Compatible with PCM and CCM memory implementations.
TECHNICAL INFORMATION
Lifecycle / Replacement Information
- Formerly manufactured by GE Fanuc Automation.
- Product lifecycle is maintained under Emerson Automation.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSGeneral Electric Series 90-30 modular baseplates and power supplies. Supports Ethernet, FIP, Profibus, GBC, and GCM communication option modules. Compatible with PCM and CCM memory implementations.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the memory size of the General Electric IC693CPU341?
The module includes 80 kilobytes of user memory and 9999 words of register memory.
Where does the serial communication port connect on the IC693CPU341?
The serial interface uses a connector physically located on the PLC power supply module.
What are the pricing and quotation terms for the IC693CPU341?
Figures found online are indicative market reference pricing only and are not a final quotation.
