PRODUCT INFORMATION
Product Overview
The General Electric DS200DMCBG1AJE is an IOS DUP processor board for the Mark V turbine control system platform. This circuit board operates within General Electric Speedtronic control system architecture. The unit provides dedicated processing functions for automated turbine drive assemblies. Compatible drive systems include industrial gas turbines, steam turbines, and wind turbine installations. Its functional catalog number defines the DMCB board designation, normal coating style, and group one manufacturing grouping.
The DS200DMCBG1AJE circuit card features three 26-pin cable connectors and one 40-pin cable connector for control cabinet interfacing. Hardware configuration relies on 19 onboard jumpers distributed across the board surface. Two diagnostic status light-emitting diodes, designated CR2 and CR12, are positioned together in one corner. This module represents a revised assembly derived from parent board DS200DMCBG1, incorporating revision grades A, J, and E.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Assembly Type | Normal Assembly |
|---|
TECHNICAL INFORMATION
Features
- Three 26-pin ribbon cable header connectors.
- One 40-pin interface cable header connector.
- Nineteen onboard hardware jumper positions for operational configuration.
- Two diagnostic status indicator LEDs labeled CR2 and CR12.
- Normal assembly construction with standardized PCB surface coating.
- Equipped with functional revisions A and J plus artwork revision E.
TECHNICAL INFORMATION
Applications
- General Electric Mark V Speedtronic gas turbine control panels.
- Industrial steam turbine automated drive control architectures.
- Wind turbine drive management and control assemblies.
TECHNICAL INFORMATION
Connections / Interfaces
- Three onboard 26-pin cable pin headers for communication and signal distribution.
- One onboard 40-pin interface connector for system ribbon cable attachment.
- Nineteen manual jumper pins used to set internal circuit routing.
TECHNICAL INFORMATION
Installation Guidelines
- Verify the placement of all 19 jumpers against system engineering drawings before mounting.
- Secure all 26-pin and 40-pin ribbon cable connections prior to applying system power.
- Open the cabinet enclosure door to observe LEDs CR2 and CR12 during initial startup.
TECHNICAL INFORMATION
Configuration Guidelines
- Set the 19 onboard hardware jumpers according to the site-specific Mark V panel documentation.
- Match jumper positions to the functional requirements of the specific turbine drive assembly.
TECHNICAL INFORMATION
Compatibility
- General Electric Mark V Speedtronic turbine control cabinets.
- Turbine drive systems utilizing parent board layout DS200DMCBG1 with revision grade AJE.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSGeneral Electric Mark V Speedtronic turbine control cabinets. Turbine drive systems utilizing parent board layout DS200DMCBG1 with revision grade AJE.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the primary function of the GE DS200DMCBG1AJE processor board?
It serves as an IOS DUP processor board within General Electric Mark V Speedtronic turbine control systems.
Which cable connectors are integrated onto the DS200DMCBG1AJE circuit board?
The board features three 26-pin connectors and one 40-pin connector for turbine drive control wiring.
How do maintenance technicians check operating activity on the DS200DMCBG1AJE?
Technicians observe two diagnostic status LEDs labeled CR2 and CR12 located in one corner of the board.
How many hardware jumpers are present on the DS200DMCBG1AJE PCB?
The board contains 19 onboard jumpers used to configure physical hardware settings for turbine operations.
What do the trailing revision characters in DS200DMCBG1AJE indicate?
They indicate functional revisions A and J along with artwork revision level E over base board DS200DMCBG1.
