PRODUCT INFORMATION
Product Overview
The General Electric DS200DTBBG1A is a Mark V series Terminal Board Digital Connector Card. This printed circuit board operates as a contact input expansion termination module. It provides two terminal blocks designated as TB1 and TB2 for field wiring terminations. Each terminal block contains terminals for ninety-five signal wires. The assembly supports up to one hundred ten signal wires attached across the terminal blocks.
The board features normal PCB coating for surface protection against standard operating environments. Hardware provisions include five jumpers, bayonet connectors, and multi-pin ribbon cable interfaces. Specific interface points include the JRR TCDA contact input connector and the JY 125 V DC power connector. The board also features the JRS/T connector, which typically remains unused in standard operations. Proper documentation of ribbon cable positions ensures correct reinstallation after replacement.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| PCB Coating | Normal Coating |
|---|
TECHNICAL INFORMATION
Features
- Two terminal blocks labeled TB1 and TB2 accommodating ninety-five signal positions each.
- Supports a maximum capacity of one hundred ten signal wire connections across terminal blocks.
- Includes JFF, JFG, and JFH ribbon cable headers alongside bayonet connectors.
- Equipped with the JRR TCDA contact input connector.
- Equipped with the JY 125 V DC DTBA board power connector.
- Configured with five hardware jumpers and normal protective PCB coating.
TECHNICAL INFORMATION
Connections / Interfaces
- TB1 and TB2 screw terminal blocks with numbered positions for discrete wiring.
- JFF, JFG, and JFH multi-pin connectors for internal drive communication ribbons.
- JRR contact input connector for TCDA board interfacing.
- JY power connector supplying 125 V DC from the DTBA board.
- JRS/T connector designated for optional or typically unused routing.
TECHNICAL INFORMATION
Installation Guidelines
- Document and record all wire terminal positions before disconnecting leads from TB1 and TB2.
- Label ribbon cables matching connectors JFF, JFG, and JFH to ensure correct reconnection.
- Mismatched ribbon cables require bringing down the drive to correct cable routing.
- Verify proper orientation before seating bayonet and multi-pin headers.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the primary function of the General Electric DS200DTBBG1A?
The DS200DTBBG1A functions as a contact input expansion termination card in Mark V systems.
How many signal wires can connect to the DS200DTBBG1A terminal blocks?
The terminal blocks can accommodate up to one hundred ten attached signal wires in total.
What power connector does the DS200DTBBG1A board utilize?
The board utilizes the JY connector to receive 125 V DC power from a DTBA board.
