PRODUCT INFORMATION
Product Overview
The General Electric DS200FSAAG1A is a Single-Phase Field Supply Gate Amplifier Board for Mark V systems. This printed circuit board operates within the Speedtronic control architecture. The unit provides gate amplification functions within the greater automated drive assembly. The assembly attaches directly to another drive component via standoffs. Holes on each corner align with the standoffs to allow secure screw mounting.
The DS200FSAAG1A board incorporates an A-rated functional product revision. This revision altered the originally-introduced dimensions and performance specifications from the parent board. The circuit board includes configurable jumpers and one 10-pin connector. Two fast-acting fuses rated at 30 A and 60 V protect the board assembly. Metal surfaces surround the corner mounting holes to help protect the board during fastener tightening.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Abbreviation | FSAA |
|---|
| Instruction Manual | GEI-100186 |
|---|
| Configurable Hardware | Qty 6 Jumpers (JP1-JP6) |
|---|
TECHNICAL INFORMATION
Features
- Equipped with two fast-acting fuses rated for 30 A and 60 V.
- Includes one 10-pin connector for circuit interfacing.
- Features hardware jumpers for board configuration.
- Integrated test points provide access for signal verification.
- Metal surfaces protect corner mounting holes against mechanical stress.
TECHNICAL INFORMATION
Applications
- Mark V automated drive assemblies.
- Single-phase non-reversing plugging field supply systems.
- Field supply systems configured for DS200FSAAG2 or NRX settings.
TECHNICAL INFORMATION
Connections / Interfaces
- One 10-pin interface connector for system signal communication.
- Multiple hardware test points distributed across the board for diagnostics.
TECHNICAL INFORMATION
Installation Guidelines
- Examine jumper positions on the existing board before replacement.
- Duplicate all jumper positions on the newly installed board.
- Align corner holes over the standoffs on the companion drive component.
- Use one hand to guide the screwdriver and the other to turn it.
- Tighten all four screws evenly into the standoffs without over-tightening.
TECHNICAL INFORMATION
Configuration Guidelines
- Consult instruction manual GEI-100186 for board setup and operational instructions.
- Configure the hardware jumpers to match the intended drive field supply setup.
TECHNICAL INFORMATION
Compatibility
- Compatible with Mark V automated drive systems utilizing single-phase field supply sections.
- Belongs to the DS200FSAAG1 group for non-reversing plugging field supplies.
- Capable of operating within DS200FSAAG2 or NRX field supply settings.
TECHNICAL INFORMATION
Lifecycle / Replacement Information
- The DS200FSAAG1A board represents an A-rated functional revision of the parent DS200FSAAG1 board.
- The functional revision altered the original product dimensions and performance specifications.
- Users must verify mechanical and electrical requirements prior to selecting this revised board.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSCompatible with Mark V automated drive systems utilizing single-phase field supply sections. Belongs to the DS200FSAAG1 group for non-reversing plugging field supplies. Capable of operating within DS200FSAAG2 or NRX field supply settings.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the primary function of the DS200FSAAG1A board?
It provides single-phase field supply gate amplification in General Electric Mark V drive assemblies.
Which instruction manual details the DS200FSAAG1A board?
Instruction manual GEI-100186 provides technical details and installation guidelines for this board.
What fuse ratings are installed on the DS200FSAAG1A?
The board assembly contains two fast-acting fuses rated for 30 A and 60 V.
How does the DS200FSAAG1A revision differ from the parent DS200FSAAG1 board?
The A-rated functional revision altered the original board dimensions and performance specifications.
