PRODUCT INFORMATION
Product Overview
The General Electric IS200TRTDH1CCC is a Temperature Resistance Terminal Device for Mark VI / Mark VIe control systems. This printed circuit board serves as an RTD input terminal board with conformal coating. It represents a three-fold revision version of the base IS200TRTDH1 terminal board. The unit functions within group one of the Mark VI series hardware lineup.
The board accommodates sixteen RTD inputs using two removable terminal blocks with twenty-four screw points each. Field RTD sensors connect to the terminal blocks through a three-wire wiring setup. Three female 37-pin cable connectors provide the interface between this board and the VRTD processor. The input circuitry includes integrated noise suppression to maintain signal accuracy.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Assembly Version | Normal Assembly |
|---|
TECHNICAL INFORMATION
Features
- Provides terminal points for sixteen RTD field inputs
- Includes two removable terminal blocks with twenty-four screw points each
- Supports three-wire field connections for connected RTD sensors
- Compatible with platinum, copper, and nickel temperature sensing elements
- Equipped with three female 37-pin cable connectors for VRTD processor connection
- Features integrated noise suppression on input signal channels
- Constructed with a protective conformal coating on the printed circuit board
TECHNICAL INFORMATION
Applications
- RTD temperature signal acquisition in General Electric Mark VI control systems
- Interface terminal wiring for the General Electric VRTD processor module
TECHNICAL INFORMATION
Connections / Interfaces
- Two removable terminal blocks with 24 screw terminals each for field sensor wiring
- Three female 37-pin cable connectors for cabling to the VRTD processor
TECHNICAL INFORMATION
Installation Guidelines
- Handle the unit using antistatic precautions because the board contains static-sensitive components.
- Maintain field wiring within the maximum two-way cable resistance rating of 15 ohms.
TECHNICAL INFORMATION
Compatibility
- Integrates into General Electric Mark VI and Mark VIe control systems.
- Connects to the General Electric VRTD processor module via dedicated cabling.
TECHNICAL INFORMATION
Lifecycle / Replacement Information
- Represents the three-fold revision build of the parent IS200TRTDH1 RTD input terminal board.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSIntegrates into General Electric Mark VI and Mark VIe control systems. Connects to the General Electric VRTD processor module via dedicated cabling.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What RTD types does the IS200TRTDH1CCC support?
The board supports platinum (10, 100, and 200 ohm), copper (10 ohm), and nickel (120 ohm) RTDs.
How do field RTDs connect to the IS200TRTDH1CCC board?
Field sensors connect to two removable 24-point terminal blocks using a three-wire wiring configuration.
How does the IS200TRTDH1CCC interface with the controller?
The terminal board connects to the VRTD processor using three female 37-pin cable connectors.
