PRODUCT INFORMATION
Product Overview
The General Electric DS200PCCAG9ACB is a Mark V series Power Connect Card. It interfaces the drive with the silicon-controlled rectifier power bridge. Multiple connectors transmit and receive power and control signals to the drive. This card belongs to scaling group nine for regenerative drive systems. It operates with armature voltages between 240 and 630 volts direct current.
The DS200PCCAG9ACB board incorporates dedicated direct current voltage snubbers. It installs into drive assemblies supported by J-style and M-style structural frames. The hardware pairs directly with an SDCI series power board. Its power bridge circuit incorporates both a leg fuse and a leg reactor. The board accepts alternating current inputs up to 600 volts root mean square. It supports installations using separate or common bus transformer arrangements.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Instruction Manual | GEI-100161 |
|---|
| Weight | 9 ounces |
|---|
| Revision | ACB |
|---|
| Scaling Group | G9, Regenerative |
|---|
| Armature Voltage | 240-630 Volts |
|---|
TECHNICAL INFORMATION
Features
- Group nine regenerative configuration for Mark V drive systems
- Rated for 240 to 630 VDC armature voltage operation
- Accepts AC input levels up to 600 V rms
- Equipped with dedicated direct current voltage snubbers
- Compatible with J-style and M-style drive frames
- Interfaces directly with SDCI series power boards
- Integrates both a leg fuse and a leg reactor
TECHNICAL INFORMATION
Applications
- General Electric Mark V drive SCR power bridge interfacing
- Regenerative DC drive installations in J-frame and M-frame assemblies
TECHNICAL INFORMATION
Connections / Interfaces
- Multi-pin connectors for drive control and feedback signals
- Power connections for the SCR power bridge
- Terminations for separate or common bus transformers
TECHNICAL INFORMATION
Installation Guidelines
- Disconnect and lock out all external power sources before service.
- Verify that surface voltages have fully discharged before touching components.
- Label each cable connector before removing it from the existing board.
- Fasten the board securely into J-style or M-style chassis mounts.
TECHNICAL INFORMATION
Configuration Guidelines
- Refer to instruction manual GEI-100161 for wiring verification.
- Consult manual GEH-6005 for group nine scaling configuration details.
- Confirm compatibility with the associated SDCI power board.
TECHNICAL INFORMATION
Compatibility
- General Electric Mark V drive systems
- SDCI series power boards
- J-style and M-style drive frames
TECHNICAL INFORMATION
Lifecycle / Replacement Information
- Direct replacement requires matching group nine revision specifications.
- Ensure all harness positions match original equipment connections.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSGeneral Electric Mark V drive systems SDCI series power boards J-style and M-style drive frames
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What function does the DS200PCCAG9ACB perform in a Mark V drive?
The card interfaces the drive control unit with the SCR power bridge. It routes power and control signals.
What frame styles accommodate the DS200PCCAG9ACB card?
The board installs within drive units that use J-style and M-style structural frames.
What operating voltages apply to the DS200PCCAG9ACB?
The unit operates with armature voltages between 240 and 630 VDC. It accepts AC inputs up to 600 V rms.
