PRODUCT INFORMATION
Product Overview
Revision scope: These specifications describe 1783-SFP100FX/A (Series A). Check the corresponding technical data before specifying another hardware series.
The Allen-Bradley 1783-SFP100FX is a Stratix Fiber-Optic SFP Module designed for Fast Ethernet industrial communication. It installs directly into compatible small form-factor pluggable transceiver slots on industrial Ethernet switches. This transceiver module supports 100BASE-FX communication over multimode optical fiber infrastructure across plant networks. It operates at an optical transmission wavelength of 1310 nm over distances up to 2 km.
This transceiver features a standard dual-LC optical connector interface for duplex transmission and reception. It accommodates 62.5/125 micrometer multimode fiber cable with a modal bandwidth rating of 500 MHz/km. The unit includes digital optical monitoring support for real-time tracking of critical transceiver operating parameters. It provides optical noise immunity across extended network segments in demanding production environments.
TECHNICAL DATA
Technical Specifications
These specifications describe 1783-SFP100FX/A (Series A). Check the corresponding technical data before specifying another hardware series.
| Parameter | Specification |
|---|
| Network | Ethernet, Fast Ethernet |
|---|
| Interface standard | 100BASE-FX multimode fiber |
|---|
| Data rate | 100 Mbit/s |
|---|
| Cable length | 2 km |
|---|
| Fiber core and cladding | 62.5/125 micrometers |
|---|
| Digital optical monitoring | Supported |
|---|
| Interface connector | Dual LC |
|---|
| Modal bandwidth | 500 MHz/km |
|---|
| Wavelength | 1310 nm |
|---|
TECHNICAL INFORMATION
Order Information
| Revision Part # | Also known as | Reference Price |
|---|
| 1783-SFP100FX Ser A | 1783-SFP100FX/A, Series A | USD 139.00, indicative (Used/Refurbished) |
Reference prices are observed third-party market prices for the stated revision, not a final Aituos quotation.
TECHNICAL INFORMATION
Features
- Operates at a 100 Mbit/s Fast Ethernet transmission rate.
- Supports 100BASE-FX multimode optical fiber link connections.
- Provides a maximum transmission distance of 2 km.
- Utilizes a standard dual-LC duplex optical connector.
- Operates at a nominal optical wavelength of 1310 nm.
- Compatible with 62.5/125 micrometer multimode optical cable.
- Supports digital optical monitoring for operating diagnostic feedback.
TECHNICAL INFORMATION
Applications
- Fast Ethernet fiber uplinks between industrial control cabinets.
- Long-distance switch interconnection across plant automation floors.
- High-noise industrial environments requiring optical isolation.
- Stratix industrial Ethernet switch network expansion.
TECHNICAL INFORMATION
Connections / Interfaces
- One duplex dual-LC optical fiber connector.
- One pluggable SFP host board edge connector.
TECHNICAL INFORMATION
Installation Guidelines
- Disconnect fiber cables before inserting or removing the transceiver module.
- Align the transceiver with the switch SFP port cage carefully.
- Slide the module into the slot until the latch clicks firmly.
- Keep protective dust caps installed when fiber cables are detached.
TECHNICAL INFORMATION
Configuration Guidelines
- Verify the host switch port supports 100 Mbit/s Fast Ethernet operation.
- Enable digital optical monitoring through the host switch configuration interface.
- Confirm that the remote optical transceiver matches the 1310 nm wavelength.
TECHNICAL INFORMATION
Compatibility
- Compatible with Allen-Bradley Stratix managed and unmanaged Ethernet switches with 100BASE-FX SFP support.
- Interoperates with standard 100BASE-FX multimode transceivers using 62.5/125 micrometer optical fiber.
TECHNICAL INFORMATION
Lifecycle / Replacement Information
- Series A hardware serves as the initial catalog release for this transceiver model.
- Verify host switch firmware compatibility before replacing transceivers during system maintenance.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSCompatible with Allen-Bradley Stratix managed and unmanaged Ethernet switches with 100BASE-FX SFP support. Interoperates with standard 100BASE-FX multimode transceivers using 62.5/125 micrometer optical fiber.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the maximum transmission distance for the 1783-SFP100FX?
The module supports transmission distances up to 2 km over 62.5/125 micrometer multimode fiber cable.
Which optical connectors does the 1783-SFP100FX utilize?
The transceiver features an industry-standard dual-LC connector interface for duplex fiber optic connections.
Does the 1783-SFP100FX support digital optical monitoring?
Yes, this transceiver supports digital optical monitoring to report real-time operating metrics to the host switch.
What is the market reference price for the 1783-SFP100FX?
Commercial observations report indicative pricing around USD 139.00 in refurbished condition. This is an indicative market reference only, not a final quotation.
