PRODUCT INFORMATION
Product Overview
The General Electric DS200IMCPG1BBA is a Mark V power supply board designed for turbine control and drive management systems. It functions within compatible wind, steam, and gas turbine automated drive assemblies. The unit incorporates Speedtronic control system technology architecture. Standardized voltage-limiting hardware components provide voltage suppression and limitation across the circuit board assembly.
This printed circuit board belongs to the Mark V Series group one product grouping with normal PCB coating. It connects directly to the DS200SDCC Drive Control Board through a dedicated cable link. Communication and signal distribution rely on onboard multi-pin connectors. Two green status indicators show operating activity when power is applied.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| PCB Coating | Normal Coating |
|---|
TECHNICAL INFORMATION
Features
- Functions within General Electric Mark V Speedtronic turbine control platforms.
- Integrates voltage suppression and limitation hardware components directly on the board.
- Contains one 40-pin connector and one 34-pin connector for drive communication.
- Provides two green LED indicators to verify operational status and activity.
- Features factory-applied normal circuit board coating.
TECHNICAL INFORMATION
Applications
- Wind turbine automated drive management systems.
- Steam turbine speed and automated drive control assemblies.
- Gas turbine automated drive and control installations.
TECHNICAL INFORMATION
Connections / Interfaces
- Connects to the DS200SDCC Drive Control Board via a cable attached to connector 1PL.
- Equipped with one 40-pin connector for transmitting and receiving control signals.
- Features one 34-pin connector to interface with drive boards and components.
- Includes two green LEDs that illuminate during active power supply operation.
TECHNICAL INFORMATION
Installation Guidelines
- Viewing status LEDs requires opening the cabinet door while operating power is present.
- Do not touch internal components while inspecting active drive cabinet indicators.
- Disconnect all power immediately if any tool or hardware falls inside the cabinet.
- Remove power supply fuses or engage the emergency shutoff switch before retrieving items.
- Verify zero voltage presence with a calibrated testing meter before touching components.
- Use a hand-held vacuum to clear dust and foreign debris prior to restarting.
TECHNICAL INFORMATION
Compatibility
- Compatible with General Electric Mark V Speedtronic turbine control systems.
- Interacts directly with the DS200SDCC Drive Control Board.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSCompatible with General Electric Mark V Speedtronic turbine control systems. Interacts directly with the DS200SDCC Drive Control Board.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the primary function of the General Electric DS200IMCPG1BBA?
It provides power and control signal routing within GE Mark V turbine drive systems.
How does the DS200IMCPG1BBA interface with the drive control board?
It connects via a cable linked directly to the 1PL connector on the DS200SDCC board.
What onboard connectors are present on the DS200IMCPG1BBA?
The board features one 40-pin connector and one 34-pin connector for drive control signals.
How can maintenance personnel monitor DS200IMCPG1BBA board activity?
Two green LEDs illuminate on the board to indicate operating activity while power is applied.
