PRODUCT INFORMATION
Product Overview
The General Electric DS200PCCAG8ACB is a dedicated Power Connect Card engineered for the Mark V turbine control system. This card provides an interface between the turbine drive assembly and the SCR power bridge. It operates within control architectures managing industrial gas, steam, and wind turbine drive systems. The Mark V platform uses Speedtronic control system technology to manage turbine drive operations.
The DS200PCCAG8ACB card routes signals between the power supply board, the SCR bridge, and drive components. Standardized hardware including resistors, transistors, specialized integrated circuits, and large silver drum-style capacitors provides internal voltage suppression. The part number designates a Group 8 PCCA assembly with normal PCB coating. It incorporates primary revision A, secondary revision C, and artwork revision B.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Instruction Manual | GEI-100161 |
|---|
| PCB Coating | Normal Coating |
|---|
TECHNICAL INFORMATION
Features
- Serves as the primary interface between the drive control system and the SCR power bridge.
- Routes signals directly between internal drive components and the power supply board.
- Integrates onboard voltage suppression using specialized resistors, transistors, and integrated circuits.
- Features large drum-style capacitors arranged along the lower edge of the circuit board.
- Manufactured with standard protective PCB coating according to GE Group 8 specifications.
TECHNICAL INFORMATION
Applications
- General Electric Mark V Speedtronic gas turbine control assemblies.
- Steam turbine drive management systems.
- Automated wind turbine drive and power bridge control installations.
TECHNICAL INFORMATION
Connections / Interfaces
- Multiple multi-pin ribbon cable headers for drive component communications.
- Dedicated signal paths connecting directly to the power supply board.
- Direct interface terminals connecting to the drive SCR power bridge.
TECHNICAL INFORMATION
Installation Guidelines
- Photograph and label all wiring and ribbon cables before removing the original board.
- Support the board-mounted header with one hand when removing ribbon cables.
- Grasp the cable connector housing directly rather than pulling on the ribbon cable itself.
- Verify connector positioning, as newer board revisions may relocate connector positions.
TECHNICAL INFORMATION
Configuration Guidelines
- Consult instruction manual GEI-100161 for wiring pinouts and signal verification procedures.
- Confirm that all ribbon cable connections seat fully to prevent signal transmission errors.
TECHNICAL INFORMATION
Compatibility
- Compatible with General Electric Mark V turbine control drive systems.
- Maintains functional interchangeability with earlier DS200PCCAG8 revisions when properly cabled.
TECHNICAL INFORMATION
Lifecycle / Replacement Information
- Replaces earlier revisions of the parent DS200PCCAG8 Power Connect Board.
- Includes functional revisions A and C along with artwork revision B.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSCompatible with General Electric Mark V turbine control drive systems. Maintains functional interchangeability with earlier DS200PCCAG8 revisions when properly cabled.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the primary role of the GE DS200PCCAG8ACB in a drive system?
The card interfaces the drive system with the SCR power bridge and routes critical control signals.
What documentation covers the installation of the DS200PCCAG8ACB?
General Electric instruction manual GEI-100161 provides specific technical details and installation guidelines for this card.
How should ribbon cables be handled during board replacement?
Grip the connector housing firmly while supporting the board connector. Do not pull the flexible ribbon cable.
