PRODUCT INFORMATION
Product Overview
General Electric DS200SIOBH1A is a Mark V series VME Stand I/O Card. It operates within legacy Speedtronic control systems for gas, steam, and wind turbine drive assemblies. The circuit board includes conformal coating protection across its surface. It belongs to Mark V Group 1 with an A-level functional revision.
The board layout integrates twenty jumpers alongside three switch blocks. Each switch block provides six individual switches for eighteen configurable positions in total. It features one diagnostic LED indicator and a dedicated 40-pin ribbon cable connector. Ribbon cables link the module to external drive components for signal transmission and data acquisition.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| PCB Coating Type | Conformal Coating |
|---|
| Mark V Series Grouping | Group 1 |
|---|
TECHNICAL INFORMATION
Features
- Features twenty configurable on-board hardware jumpers.
- Contains three switch blocks with six switches each, providing eighteen total switches.
- Includes one diagnostic LED indicator on the assembly.
- Provides one 40-pin ribbon connector for system signal transmission.
- Built with conformal coating for component protection.
- Designed for GE Mark V Speedtronic turbine control architectures.
TECHNICAL INFORMATION
Applications
- General Electric Mark V Speedtronic turbine control systems.
- Gas turbine automated drive management systems.
- Steam turbine control assemblies.
- Wind turbine drive control packages.
TECHNICAL INFORMATION
Connections / Interfaces
- Equipped with one 40-pin connector for ribbon cable attachment.
- Ribbon cables transmit outgoing signals to adjacent drive components.
- Internal ribbon wires receive incoming signals for on-board processing.
TECHNICAL INFORMATION
Installation Guidelines
- Grip the plastic connector firmly when disconnecting ribbon cables.
- Do not pull directly on the ribbon cable wires.
- Route ribbon cables away from current-carrying cables to avoid electrical interference.
- Ensure cable routing does not obstruct drive cooling airflow paths.
TECHNICAL INFORMATION
Lifecycle / Replacement Information
- The DS200SIOBH1A belongs to the legacy GE Mark V product line.
- Manufacturer production for this series is discontinued.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the function of General Electric DS200SIOBH1A?
The DS200SIOBH1A functions as a VME Stand I/O Card within Mark V Speedtronic turbine drive control systems.
How should ribbon cables be removed from the DS200SIOBH1A board?
Firmly grip the plastic connector body and pull straight out. Never pull directly on the flat ribbon cable.
How do you prevent electrical interference during DS200SIOBH1A installation?
Route ribbon signal cables away from cables carrying high electrical current inside the drive enclosure.
What hardware configuration options exist on the DS200SIOBH1A?
The board contains twenty jumpers and three switch blocks housing eighteen total switches for hardware configuration.
