PRODUCT INFORMATION
Product Overview
The General Electric DS200STBAG1A is a Basic Drive Terminal Board designed for Mark V turbine control systems. It provides physical termination and connection points for input and output drive signals. The board operates within General Electric Speedtronic automated drive assemblies across wind, steam, and gas turbine applications. Factory testing interfaces include connectors CP1PL, CP2PL, CP3PL, and CP4PL supplying 115 VAC power.
This assembly incorporates an RS-232C serial communications link accessible through the dedicated COMPL connector. Technicians use this port to interface with external Drive Configuration Tools on a laptop. Hardware setup relies on more than twenty-five configurable jumper positions across the circuit board. Jumpers JP4 and JP5 specifically establish configuration pathways for the onboard RS-232C connection.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Instruction Manual | GEI-100177 |
|---|
| PCB Coating | Normal Coating |
|---|
TECHNICAL INFORMATION
Features
- Provides primary I/O signal connection points for Mark V drive systems.
- Includes factory testing power connectors CP1PL, CP2PL, CP3PL, and CP4PL.
- Features an RS-232C COMPL serial port for direct laptop configuration interface.
- Contains over twenty-five selectable hardware jumpers for system setup.
- Applies a standard protective surface coating across board components.
TECHNICAL INFORMATION
Applications
- Mark V Speedtronic control systems for heavy-duty gas turbines.
- Steam turbine drive management and control assemblies.
- Wind turbine automated drive systems using Mark V hardware.
TECHNICAL INFORMATION
Connections / Interfaces
- Four 115 VAC factory power connectors designated CP1PL, CP2PL, CP3PL, and CP4PL.
- RS-232C serial port via COMPL connector for external drive configuration tools.
- Multiple terminal points for incoming and outgoing field drive signals.
TECHNICAL INFORMATION
Installation Guidelines
- Verify that the host panel is completely de-energized prior to board replacement.
- Inspect cable seating at the COMPL serial connector before initiating configuration routines.
TECHNICAL INFORMATION
Configuration Guidelines
- Configure serial laptop communications by placing jumper JP4 across pins 1 and 2.
- Set jumper JP5 across pins 3 and 4 to establish serial laptop communications.
- Alternate jumper positions during troubleshooting if serial communication fails to link properly.
- Verify that the host laptop serial port settings match board communication parameters.
TECHNICAL INFORMATION
Compatibility
- Compatible with General Electric Mark V Speedtronic turbine control drive panels.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSCompatible with General Electric Mark V Speedtronic turbine control drive panels.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the primary function of the General Electric DS200STBAG1A?
It serves as a basic drive terminal board providing I/O signal termination in Mark V control systems.
Which jumpers configure the RS-232C serial interface on the DS200STBAG1A?
Jumpers JP4 and JP5 configure the serial link for external laptop communication tools.
What are the CP1PL through CP4PL connectors used for on this board?
These four factory-use connectors supply 115 VAC power to the panel for factory testing.
Which instruction manual documents the DS200STBAG1A terminal board?
General Electric documentation GEI-100177 provides official instructional details and specifications.
