PRODUCT INFORMATION
Product Overview
The General Electric IC693MDL330 is an AC output module for the Series 90-30 PLC family. This module provides eight discrete AC output points arranged in two isolated groups of four points. Each group operates on an independent common connection. The isolated groups can connect to distinct AC phases or share a common AC power supply. The module provides a rated operating voltage of 120 to 240 V AC.
Each output point handles a maximum continuous current of 2 Amps. The module supports an output voltage range from 85 to 264 V AC at 50 to 60 Hertz. Each common line includes a protective 5 Amp fuse. Individual outputs feature an internal RC snubber network to suppress transient line noise. The module requires external AC power because it does not support direct current loads.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Weight | 1.44 lbs (0.65 kg) |
|---|
| Rated Voltage | 120 to 240 V AC |
|---|
| Output Voltage Range | 85 to 264 V AC |
|---|
| Outputs | 8 |
|---|
| Isolation between field side and logic side | 1500 V |
|---|
| Max. Inrush Current Per Cycle | 20 A |
|---|
| Minimum Load Current | 100 mA |
|---|
| Max. Output Voltage Drop | 1.5 V |
|---|
| Output Current Per Point | 2 A |
|---|
TECHNICAL INFORMATION
Features
- Provides eight AC output points arranged into two isolated groups.
- Delivers up to 2 Amps maximum continuous output current per point.
- Supports an operational AC voltage range of 85 to 264 V AC.
- Features maximum inrush capability up to 20 Amps per cycle for inductive loads.
- Includes an internal 5 Amp protection fuse for each common circuit.
- Contains internal RC snubbers on all outputs for electrical noise suppression.
- Provides LED indicators displaying per-point output states and blown fuse status.
TECHNICAL INFORMATION
Applications
- Switching inductive AC control loads such as solenoids, contactors, and motor starters.
- Controlling AC-powered incandescent illumination and industrial indication lamps.
TECHNICAL INFORMATION
Connections / Interfaces
- Provides two isolated common terminals that remain electrically separated from internal module circuits.
- Allows connection across distinct AC voltage phases for separate output groups.
- Includes green status LEDs marked A1 through A8 for output point states.
- Features a dedicated red F LED indicating blown fuse conditions.
TECHNICAL INFORMATION
Installation Guidelines
- Install the unit into any standard I/O slot of a Series 90-30 baseplate.
- Ensure connected external AC power operates between 50 and 60 Hertz.
- Verify total group current does not exceed 4 Amps at 40 degrees Celsius.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the continuous output rating of the IC693MDL330?
Each point provides 2 Amps continuous current across 85 to 264 V AC.
Can the IC693MDL330 switch direct current loads?
No, the module operates solely on AC power and does not support DC loads.
How does the IC693MDL330 indicate a blown fuse condition?
A central red LED marked F illuminates when an internal 5 Amp fuse blows.
