PRODUCT INFORMATION
Product Overview
The General Electric IC693PWR330 is a high-capacity Power Supply for the Series 90-30 control platform. This module delivers power directly to backplane-mounted devices across Series 90-30 racks. It supplies a total combined load capacity of 30 Watts across three separate output rails. Unlike standard units, the module allows full 30-Watt allocation to the +5 VDC output. This feature supports larger rack configurations that require higher current capacity for processing and I/O modules.
The module provides three distinct outputs including +5 VDC, +24 VDC relay power, and isolated +24 VDC. It operates from input ranges of 85 to 264 VAC or 100 to 300 VDC. The faceplate features six wiring terminals for alternating or direct current supply lines. In addition, an embedded RS-485 serial communication port enables connection to programming terminals or compatible serial equipment. Front-panel status indicators show power status, operational health, run state, and battery charge levels.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Weight | 1.50 lbs (0.68 kg) |
|---|
| Protocol Support | RS485 |
|---|
| No. of Outputs | Three (3) |
|---|
| Nominal Rated Voltage | 120/240 VAC or 125 VDC |
|---|
| Input Voltage Range, AC | 85 to 264 VAC |
|---|
| Input Voltage Range, DC | 100 to 300 VDC |
|---|
| Input Power | 90 VA with VAC Input; 50 W with VDC Input |
|---|
| Inrush Current | 4A peak, 250 milliseconds maximum |
|---|
| Output Voltage | 5 VDC: 5.0 VDC to 5.2 VDC (5.1 VDC nominal) Relay 24 VDC: 24 to 28 VDC Isolated 24 VDC: 21.5 VDC to 28 VDC |
|---|
| Output Power | 5 VDC: 30 Watts, maximum 24 VDC Relay: 15 watts maximum 24 VDC Isolated: 20 watts maximum |
|---|
| Holdup Time | 20 milliseconds, minimum |
|---|
| Voltage | 120/240 Volts AC , 125 VDC |
|---|
| Power | 30 watts |
|---|
| Communication | RS 485 |
|---|
| Protective limit | 5 VDC for overvoltage, over current |
|---|
| Standards | CE, UL |
|---|
| Number of connection terminals | 6 |
|---|
| Product Lifecycle Status* | Discontinued/Obsolete |
|---|
TECHNICAL INFORMATION
Features
- Provides up to 30 Watts total combined output capacity across three separate voltage rails.
- Permits full 30-Watt consumption specifically dedicated to the +5 VDC output rail.
- Accepts broad input voltage ranges spanning 85 to 264 VAC or 100 to 300 VDC.
- Includes an integrated RS-485 communication port for workstations and hand-held programmer units.
- Offers protective limits on the 5 VDC output against overvoltage and overcurrent faults.
- Features LED indicators for PWR, OK, RUN, and BATT operational statuses.
TECHNICAL INFORMATION
Applications
- High-load Series 90-30 PLC rack installations requiring concentrated +5 VDC power.
- Industrial automation systems utilizing mixed AC and DC input power sources.
- Series 90-30 baseplates requiring direct serial connection to external programming devices.
TECHNICAL INFORMATION
Connections / Interfaces
- Six screw terminals on the front face support incoming AC or DC power connections.
- The top three terminals accept AC wiring for line, neutral, and protective earth grounds.
- DC power wiring utilizes the top two polarity-sensitive terminals for positive and negative leads.
- An integrated RS-485 port connects programming hardware or compatible serial devices.
TECHNICAL INFORMATION
Installation Guidelines
- Install this power supply exclusively in the leftmost slot of the Series 90-30 rack.
- Secure external supply wiring to the front six-terminal connector block before applying line power.
- Maintain correct polarity when wiring a 125 VDC nominal power source to the module terminals.
TECHNICAL INFORMATION
Configuration Guidelines
- Verify that total combined power consumption across all three outputs does not exceed 30 Watts.
- Ensure +5 VDC load does not exceed 30 Watts when powering large processor racks.
TECHNICAL INFORMATION
Compatibility
- Compatible with General Electric Series 90-30 programmable logic controller racks and backplanes.
- Interfaces with GE Fanuc Hand-Held Programmers and compatible PC workstations via RS-485.
TECHNICAL INFORMATION
Lifecycle / Replacement Information
- The IC693PWR330 module has reached discontinued and obsolete lifecycle status from the manufacturer.
TECHNICAL INFORMATION
Compliance and Certifications
- Certified compliant with Underwriters Laboratories (UL) safety standards.
- Meets applicable European Conformity (CE) standards.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSCompatible with General Electric Series 90-30 programmable logic controller racks and backplanes. Interfaces with GE Fanuc Hand-Held Programmers and compatible PC workstations via RS-485.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
In which slot must the IC693PWR330 power supply be installed?
The IC693PWR330 can only be installed in the leftmost slot of a Series 90-30 rack.
What input voltage sources does the IC693PWR330 support?
It accepts 85 to 264 VAC at 120/240 VAC nominal, or 100 to 300 VDC at 125 VDC nominal.
What are the individual output capacity ratings of the IC693PWR330?
Total capacity is 30 Watts, with up to 30W on +5VDC, 20W on isolated +24VDC, and 15W on relay +24VDC.
What communication interface is integrated into the IC693PWR330?
The module features an embedded RS-485 port for serial connection to computers or handheld programmers.
