PRODUCT INFORMATION
Product Overview
The General Electric IC695ACC402 is a CPU Energy Pack designed for the PACSystems RX3i control family. This energy pack operates exclusively with the PACSystems RX3i CPE330 controller. During sudden plant power loss, it maintains controller power automatically. This backup power allows the processor to transfer RAM data to non-volatile flash memory. The hardware package includes a mounting base, ground strap, dedicated cable, and capacitor pack module.
The IC695ACC402 module supports DIN rail mounting and flat panel installation configurations. It connects directly to the partner CPE330 processor using a 36-inch IC695CBL002 cable. The energy pack delivers an output voltage range from 18 to 30 VDC. Maximum output power reaches 45 Watts with a maximum output current of 2.25 Amperes. Diagnostic LED indicators on the unit report input, operational status, and output conditions.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Weight | 1.50 lbs (0.68 kg) |
|---|
| Product Description | Energy pack |
|---|
| Compatible Series | PACSystem RX3i |
|---|
| Compatible controllers | CPE330 |
|---|
| Compatible CPU | RX3i CPE330 CPU |
|---|
| Mounting | DIN rail / Panel |
|---|
| Compatible controller | CPE 330 |
|---|
| Power Source | PLC Backplane |
|---|
| LED indicators | IN; STAT; OUT |
|---|
| Voltage rating | 18-30 VDC |
|---|
| Dedicated Cable | IC695CBL002 Cable |
|---|
| Cable | IC695CBL002 |
|---|
| Maximum input power | 24 watts |
|---|
| Purpose | To Save the CPU Data During Power Failures |
|---|
| Input voltage range | 20–30 Vdc |
|---|
| Output voltage range | 18-30 VDC |
|---|
| Ground Strap | Included |
|---|
| Input power, maximum | 36 W + connected device power requirement |
|---|
| Maximum output power | 45 W |
|---|
| Base | Included |
|---|
| Maximum output current | 2.25 A |
|---|
| Output power maximum | 45 W |
|---|
| Output current maximum | 2.25 A |
|---|
| Compatible cable | IC695CBL002 |
|---|
| Backup trip voltage | 19 Vdc ±4% |
|---|
| Cable length | 36” (1 m) |
|---|
| Capacitor Pack life expectancy | 5 years |
|---|
| Replacement Cap Pack module | IC695ACC412 |
|---|
| Operating temperature | -25 to 60°C (32°F to 140°F) |
|---|
| Life expectancy | 5 Years |
|---|
| Product Lifecycle | Active |
|---|
TECHNICAL INFORMATION
Features
- Operates exclusively with the General Electric PACSystems RX3i CPE330 controller.
- Preserves power to write volatile user RAM contents to non-volatile memory.
- Connects via a dedicated 36-inch IC695CBL002 interface cable.
- Provides up to 45 Watts maximum output power at 2.25 Amperes.
- Features onboard diagnostic LED indicators designated as IN, STAT, and OUT.
- Supports standard DIN rail or panel surface mounting configurations.
- Delivers an operational capacitor backup life expectancy of five years.
TECHNICAL INFORMATION
Applications
- Emergency power backup for PACSystems RX3i CPE330 control systems.
- Data retention and transfer to non-volatile memory during unexpected power failures.
- Orderly system shutdown preservation across automated industrial manufacturing facilities.
TECHNICAL INFORMATION
Connections / Interfaces
- Dedicated interface port for the 1-meter IC695CBL002 interconnect cable.
- Integrated captive screws secure physical attachment to the CPE330 controller.
- Ground strap terminal connection point for protective earth grounding.
TECHNICAL INFORMATION
Installation Guidelines
- Disconnect all active power to the CPE330 controller before installation.
- Mount the unit securely to a DIN rail or flat panel surface.
- Fasten the IC695CBL002 cable securely with the pre-supplied captive screws.
- Connect the ground strap properly to prevent electrical interference.
TECHNICAL INFORMATION
Configuration Guidelines
- Operating status forwards automatically across the cable to the CPE330 processor.
- Monitored status conditions include charging, fault, low capacitance, and fully charged.
- The CPU can be set to restore user memory from RAM upon restart.
- Firmware upgrades are received directly across the interconnect cable from the controller.
TECHNICAL INFORMATION
Compatibility
- General Electric PACSystems RX3i CPE330 CPU module.
- General Electric IC695CBL002 dedicated interface cable.
- General Electric IC695ACC412 replacement capacitor pack module.
TECHNICAL INFORMATION
Lifecycle / Replacement Information
- The IC695ACC402 maintains an active product lifecycle status.
- The capacitor pack module has a rated service life of five years.
- Field maintenance can be performed using replacement module IC695ACC412.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSGeneral Electric PACSystems RX3i CPE330 CPU module. General Electric IC695CBL002 dedicated interface cable. General Electric IC695ACC412 replacement capacitor pack module.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
Which controller works with the IC695ACC402 energy pack?
The IC695ACC402 operates exclusively with the General Electric PACSystems RX3i CPE330 controller.
What is the primary function of the IC695ACC402?
It provides backup power during utility failure to transfer volatile RAM data to flash memory.
What components ship with the IC695ACC402?
It ships with a base, ground strap, IC695CBL002 cable, and capacitor pack module.
What is the expected operating life of the internal capacitor pack?
The internal capacitor pack has a rated operating life expectancy of five years.
Can the internal capacitor pack module be replaced?
Yes, the internal capacitor pack can be replaced using part number IC695ACC412.
