PRODUCT INFORMATION
Product Overview
The General Electric IC695ALG600 is a universal analog module from the PACSystems RX3i platform. It provides eight general purpose input channels organized into two groups of four channels. The module supports voltage, current, resistance, thermocouple, and RTD sensor inputs. It delivers configurable resolution between 11 and 16 bits using sigma-delta conversion.
This hardware mounts directly into an RX3i universal backplane. It requires PACSystems RX3i firmware version 2.80 or later for standard operation. Configuration is performed with Proficy Machine Edition version 5.0 SP1A LD-PLC Hotfix 1. Internal power requirements are 350 milliamps at 3.3 volts and 400 milliamps at 5 volts. Maximum module power dissipation is 5.4 watts.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Weight | 1.31 lbs (0.60 kg) |
|---|
| Product Description | Universal analog input module |
|---|
| Module Type | Universal Analog |
|---|
| No of Channels | Eight (8) |
|---|
| Number of Inputs | 8 general purpose |
|---|
| No. of groups | Two (2) |
|---|
| Cold Junction Compensation | 2 channels |
|---|
| No. of channels per group | Four (4) |
|---|
| Resistance Inputs | 0 to 250 / 500 / 1000 / 2000 / 3000 / 4000 ohms |
|---|
| Input signals, Current | 0-20 mA; 4-20 mA; +/-20 mA; |
|---|
| RTD Inputs | PT 385 / 3916, N 618 / 672, NiFe 518, CU 426 |
|---|
| Input signals, Voltage | +/- 50 mV; +/- 150 mV; +/-10VDC; 0-10 VDC; +/-5VDC; 0-5 VDC and 1 - 5 VDC |
|---|
| Configurable Input Filter | 8 Hz, 12 Hz, 16 Hz, 40 Hz, 200 Hz, 1000 Hz |
|---|
| Input signals, Resistance | 0 to 250 / 500 / 1000 / 2000 / 3000 / 4000 Ohms |
|---|
| Internal Power | 3.3V: 350mA; 5V: 400 mA |
|---|
| Power Dissapation | 5.4W max |
|---|
| Thermocouple inputs | B, C, E, J, K, N, R, S, T |
|---|
| Field Status LED | Yes |
|---|
| Module conversion method | Sigma-delta |
|---|
| Terminal Block LED | Yes |
|---|
| Module resolution | 11-16 Bits |
|---|
| OK LED | Yes |
|---|
| Operating Temperature | 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit) |
|---|
| Storage Temperature | -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit) |
|---|
| Humidity | 5 to 95%, non-condensing |
|---|
TECHNICAL INFORMATION
Features
- Supports eight channels configured as two isolated groups of four channels.
- Accepts voltage, current, resistance, RTD, and thermocouple input signals.
- Provides sigma-delta analog-to-digital conversion with 11-bit to 16-bit resolution.
- Offers configurable digital input filtering from 8 Hertz to 1000 Hertz.
- Includes two channels for cold junction compensation with thermocouple sensors.
- Incorporates diagnostic LEDs for module status, field status, and terminal block detection.
TECHNICAL INFORMATION
Applications
- Industrial process temperature monitoring using resistance temperature detectors and thermocouples.
- Analog current loop measurement in PACSystems RX3i automation systems.
- Multichannel voltage data acquisition in centralized control cabinets.
TECHNICAL INFORMATION
Connections / Interfaces
- Compatible with Box-style terminal block IC694TBB032.
- Compatible with Extended Box-style terminal block IC694TBB132.
- Compatible with Spring-style terminal block IC694TBS032.
- Compatible with Extended Spring-style terminal block IC694TBS132.
- Extended terminal blocks accommodate thicker wire insulation and shield drainage wiring.
TECHNICAL INFORMATION
Installation Guidelines
- Install the unit only in a PACSystems RX3i universal backplane.
- Do not mount this module in remote or expansion backplanes.
- Maintain ambient operating temperatures between 0 and 60 degrees Celsius.
- Ensure maximum RTD cable impedance does not exceed 25 ohms.
TECHNICAL INFORMATION
Configuration Guidelines
- Configure the unit using Proficy Machine Edition version 5.0 SP1A LD-PLC Hotfix 1 or later.
- Set channel input signal types independently per channel.
- Select filter frequencies of 8, 12, 16, 40, 200, or 1000 Hertz.
TECHNICAL INFORMATION
Compatibility
- Requires RX3i universal backplane with central processor firmware version 2.80 or later.
- Supports thermocouple types B, C, E, J, K, N, R, S, and T.
- Supports RTD sensor types PT 385, PT 3916, N 618, N 672, NiFe 518, and CU 426.
TECHNICAL INFORMATION
Lifecycle / Replacement Information
- Manufactured by Emerson Automation, formerly GE Intelligent Platforms.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSRequires RX3i universal backplane with central processor firmware version 2.80 or later. Supports thermocouple types B, C, E, J, K, N, R, S, and T. Supports RTD sensor types PT 385, PT 3916, N 618, N 672, NiFe 518, and CU 426.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What input signal types does the IC695ALG600 support?
The module supports voltage, current, resistance, thermocouple, and RTD inputs across eight configurable channels.
Which backplanes are compatible with the IC695ALG600?
The unit installs into an RX3i universal backplane. It cannot be installed in expansion backplanes.
What terminal blocks work with the IC695ALG600?
It uses IC694TBB032, IC694TBB132, IC694TBS032, or IC694TBS132 terminal blocks. Extended blocks fit shielded wiring.
