PRODUCT INFORMATION
Product Overview
The General Electric IC695HSC304 is a PACSystems RX3i High-Speed Counter Module. This module features four independent counter channels designed for rapid pulse tracking. It delivers a maximum count rate of 1.5 MHz for fast counting tasks. The unit incorporates an internal sampling rate of 40 MHz for precise signal capture.
The hardware interfaces eight high-speed physical inputs and seven high-speed physical outputs. Supported input voltage levels span from 5 VDC up to 24 VDC. Output voltage ranges from 4.7 VDC to 40 VDC across all channels. Each output channel supports 1.5 A, reaching 10.5 A total module current. Configurable counter operational modes include Type A, B, C, D, E, and Z.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Weight | 1.50 lbs (0.68 kg) |
|---|
| Number of Counter Channels | 4 independent counters |
|---|
| Physical Inputs | 8 high-speed inputs |
|---|
| Physical Outputs | 7 high-speed outputs |
|---|
| Maximum Count Rate | 1.5 MHz |
|---|
| Peak Input Voltage | 35 VDC |
|---|
| Input Voltages | 5 VDC, 12 to 24 VDC |
|---|
| Output Voltage Range | 4.7 to 40 VDC |
|---|
| Output Current Rating per Channel | 1.5 A |
|---|
| Output Current Rating per Module | 10.5 A |
|---|
| Counter Modes | Configurable as Type A, B, C, D, E, Z |
|---|
| Internal Sampling Rate | 40 MHz |
|---|
TECHNICAL INFORMATION
Features
- Four independent counter channels supporting up to 1.5 MHz counting frequency.
- Internal 40 MHz sampling rate for rapid signal processing.
- Eight physical high-speed inputs accepting 5 VDC and 12 to 24 VDC.
- Seven physical high-speed outputs rated from 4.7 to 40 VDC.
- Channel output current capacity of 1.5 A with a 10.5 A total module limit.
- Configurable operational counter modes supporting Types A, B, C, D, E, and Z.
- Peak input voltage tolerance rated up to 35 VDC.
TECHNICAL INFORMATION
Connections / Interfaces
- Eight discrete high-speed inputs handle incoming sensor and encoder signals.
- Seven high-speed outputs drive external control devices directly.
- Input circuitry accommodates 5 VDC logic or 12 to 24 VDC field signals.
- Output points handle switching loads between 4.7 VDC and 40 VDC.
TECHNICAL INFORMATION
Configuration Guidelines
- Configure each channel independently across operating modes A, B, C, D, E, or Z.
- Verify pulse frequency remains within the 1.5 MHz operational boundary.
- Ensure connected load current does not exceed 1.5 A per channel.
- Maintain total output current within the 10.5 A module threshold.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the maximum counting frequency of the IC695HSC304?
The IC695HSC304 supports a maximum count rate of 1.5 MHz across four independent channels. Internal processing utilizes a 40 MHz sampling rate.
What are the input and output ratings for the IC695HSC304 module?
Inputs accept 5 VDC and 12 to 24 VDC with a 35 VDC peak rating. Outputs supply 4.7 to 40 VDC at 1.5 A per point. Total output current is 10.5 A.
Which counter modes does the IC695HSC304 support?
The module supports counter modes Type A, B, C, D, E, and Z. Each of the four channels can be configured independently.
