PRODUCT INFORMATION
Product Overview
The General Electric IC695PSA040 is a PACSystems RX3i power supply module. It delivers up to 40 Watts of total output power. The module provides three distinct voltage outputs for connected hardware. These outputs include +3.3 VDC, +5.1 VDC, and +24 VDC relay power. Internal RX3i backplane circuits and compatible modules utilize the 3.3 VDC and 5.1 VDC outputs. The 24 VDC relay output powers circuits on external relay modules.
This power supply operates on universal AC or DC incoming electrical power. Supported nominal inputs are 120/240 VAC and 125 VDC. The valid AC voltage range spans 85 to 264 VAC. The valid DC voltage range spans 100 to 300 VDC. Full load input power consumption equals 70 Watts. The unit mounts directly into compatible IC695 universal backplane racks.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Weight | 1.69 lbs (0.77 kg) |
|---|
| Catalog | IC695 |
|---|
| Current Per Terminal | 6 Amperes |
|---|
| Nominal Voltage | 120/240 VAC or 125 VDC |
|---|
| Input Power | 70 W |
|---|
| Load Capacity | 40 Watts |
|---|
| Module Type | Universal Base Power Supply |
|---|
| Backplane Support | Universal Backplane Only |
|---|
| Output Type | +5.1 VDC output +24 VDC relay output +3.3 VDC |
|---|
| Maximum number of power supply per IC695 rack | Four (4) power supply |
|---|
| Voltage Input | 120/240 V AC or 125 V DC |
|---|
| AC Power | 85 to 264 V AC |
|---|
| DC Power | 100 to 300 V DC |
|---|
| Input Power With Full Load | 70 Watts |
|---|
| Output Voltage | 24 V DC (19.2 V DC to 28.8 V DC) |
|---|
| LED Indicators | Yes |
|---|
| Input to Backplane Isolation | 250 V AC continuous/1500 V AC for 1 minute |
|---|
TECHNICAL INFORMATION
Features
- Provides 40 Watts total output load capacity across three DC output rails.
- Accepts wide-range input power from 85 to 264 VAC or 100 to 300 VDC.
- Supplies 3.3 VDC backplane power, 5.1 VDC logic power, and 24 VDC relay power.
- Includes front panel LED indicators for Power, P/S Fault, Over Temperature, and Overload.
- Features an ON/OFF power switch protected by an integrated projecting tab.
- Delivers 250 VAC continuous input-to-backplane electrical isolation.
TECHNICAL INFORMATION
Applications
- PACSystems RX3i universal backplane power distribution.
- Direct power delivery for IC695 processor and communication modules.
- Relay circuit excitation on compatible output discrete modules.
TECHNICAL INFORMATION
Connections / Interfaces
- Operates with terminal connections rated up to 6 Amperes per terminal.
- Includes an accessible ON/OFF power switch located behind the hinged front door.
- The front power switch controls module operation without disconnecting incoming utility power.
- Mates directly to the universal backplane connector system.
TECHNICAL INFORMATION
Installation Guidelines
- Install the module exclusively into an RX3i universal backplane.
- Do not mix the IC695PSA040 with other RX3i power supplies in the same backplane.
- Verify that total module consumption does not exceed 40 Watts.
- Relocate additional modules to expansion backplanes if system power demand exceeds 40 Watts.
- Up to four power supplies can reside within an IC695 rack structure.
TECHNICAL INFORMATION
Configuration Guidelines
- Enable the module using the front ON/OFF switch behind the door.
- Ensure incoming supply lines match the rated AC or DC voltage tolerances.
TECHNICAL INFORMATION
Compatibility
- Compatible with General Electric PACSystems RX3i universal backplane units.
- Powers RX3i modules within the IC695 product family.
- Does not support redundancy or increased capacity configurations.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSCompatible with General Electric PACSystems RX3i universal backplane units. Powers RX3i modules within the IC695 product family. Does not support redundancy or increased capacity configurations.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What input voltage ranges are supported by the IC695PSA040?
The module operates from 85 to 264 VAC or 100 to 300 VDC input sources.
Can the IC695PSA040 be installed in redundant power configurations?
No. The IC695PSA040 does not support redundancy or shared backplane increased capacity configurations.
What output voltages does the IC695PSA040 provide?
The unit provides +3.3 VDC, +5.1 VDC, and +24 VDC relay output rails.
What diagnostic indicators are present on the front panel?
Four front LED indicators display Power, P/S Fault, Over Temperature, and Overload statuses.
What is the market reference price for the IC695PSA040?
Pricing depends on condition, inventory availability, and logistics. All figures are indicative market reference pricing only and are not a final quotation.
