PRODUCT INFORMATION
Product Overview
The General Electric IC695PSA140 is a multi-purpose Power Supply designed for the PACSystems RX3i series. It operates with universal input voltages of 85 to 264 VAC or 100 to 300 VDC. The module delivers a maximum output power of 40 Watts to the RX3i universal backplane. It occupies two slots when installed in a universal backplane configuration.
This supply provides regulated outputs of +5.1 VDC, +3.3 VDC, and a +24 VDC relay output. The 5.1 VDC output provides up to 30 Watts, limited internally to 7 Amperes. The 3.3 VDC output provides up to 30 Watts, limited internally to 10 Amperes. Racks can accommodate up to four IC695PSA140 units for redundancy or active load sharing. Surrounding air temperatures determine the maximum output power delivered by the module.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Weight | 2.00 lbs (0.91 kg) |
|---|
| Catalog | IC695 |
|---|
| Nominal Voltage | 120/240 VAC or 125 VDC |
|---|
| AC Input Voltage | 85 to 264 V AC |
|---|
| DC Input Voltage | 100 to 300 V DC |
|---|
| Input Power | 70 W |
|---|
| Load Capacity | 40 Watts |
|---|
| Module Type | Universal Base Power Supply |
|---|
| Backplane Support | Universal Backplane Only |
|---|
| Current Per Terminal | 6 Amperes |
|---|
| Special Application | Load Sharing; Redundancy |
|---|
| Output Type | +5.1 VDC output +24 VDC relay output +3.3 VDC |
|---|
| Maximum number of power supply per IC695 rack | Four (4) power supply |
|---|
TECHNICAL INFORMATION
Features
- Delivers 40 Watts maximum total output capacity.
- Accepts universal input ranges of 85 to 264 VAC and 100 to 300 VDC.
- Provides regulated +5.1 VDC, +3.3 VDC, and +24 VDC relay outputs.
- Supports active load sharing and hot-standby redundancy across IC695 racks.
- Includes diagnostic status LEDs for Power, P/S Fault, Overtemp, and Overload.
- Contains internal overcurrent protection and a backup fusible link.
- Maintains valid output voltages during power interruptions with 20 milliseconds ride-through time.
TECHNICAL INFORMATION
Applications
- PACSystems RX3i universal backplane installations requiring redundant power supplies.
- Configurations requiring active load sharing across multiple power supply modules.
- Industrial control systems operating from wide-range AC or DC supply lines.
TECHNICAL INFORMATION
Connections / Interfaces
- Occupies two module slots on the PACSystems RX3i universal backplane.
- Terminal connections support a maximum current rating of 6 Amperes per terminal.
- Provides three output channels including +5.1 VDC, +3.3 VDC, and +24 VDC relay power.
TECHNICAL INFORMATION
Installation Guidelines
- Install the module exclusively into PACSystems RX3i universal backplanes.
- Maintain adequate airflow around the chassis to prevent overtemperature derating.
- Mount up to four modules per rack for redundant operation or load sharing.
TECHNICAL INFORMATION
Configuration Guidelines
- Fault conditions latch the power supply module into an OFF state.
- Cycle incoming supply power to clear a latched fault condition.
- Internal fault signals notify the CPU to log the appropriate diagnostic fault code.
TECHNICAL INFORMATION
Compatibility
- Compatible with General Electric PACSystems RX3i universal backplanes.
- Operates in parallel with other IC695 multi-purpose power supplies for load sharing.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSCompatible with General Electric PACSystems RX3i universal backplanes. Operates in parallel with other IC695 multi-purpose power supplies for load sharing.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What input voltages does the IC695PSA140 support?
The module supports input ranges of 85 to 264 VAC or 100 to 300 VDC.
How many IC695PSA140 modules can be installed in one rack?
Up to four multi-purpose power supply modules can be installed in a single RX3i rack.
What output voltages does the module provide?
It provides outputs of +5.1 VDC, +3.3 VDC, and a +24 VDC relay output.
How much does the IC695PSA140 cost?
Pricing depends on condition and stock availability. External figures are indicative market reference pricing only and not a final quotation.
