PRODUCT INFORMATION
Product Overview
The General Electric IC697ACC722 is an interrupt jumper board designed for the Series 90-70 control platform. This blank slot jumper reserves open rack positions for future module additions and expansion devices. It incorporates a single connector mounted directly to the board assembly. The unit maintains continuous interrupt signal lines across unoccupied chassis locations. This hardware continuity prevents signal disruption across vacant rack positions.
The module integrates with both IC697 CPU racks and IC697 expansion racks. In nine-slot chassis, the card occupies slots 2 through 8. In five-slot chassis, it installs into slots 2 through 4. The device cannot be installed into slot 1 in any rack configuration. This design provides organized signal management while preserving rack slots for system scaling. The net shipping weight of this hardware assembly is 1.50 lbs.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Weight | 1.50 lbs (0.68 kg) |
|---|
| Interrupt Jumper Type | Blank Slot Jumper |
|---|
| Connector | 1 connector mounted on the board |
|---|
| Function | Reserving unused slots for future devices |
|---|
| Continued Interrupt Signal | Supported |
|---|
| IC697 CPU Racks | Compatible |
|---|
| IC697 Expansion Racks | Compatible |
|---|
| Compatible Slots in 9-Slot Racks | Slots 2-8 |
|---|
| Compatible Slots in 5-Slot Racks | Slots 2-4 |
|---|
| Slot Restrictions | Jumper cannot be installed in slot 1 in any rack |
|---|
TECHNICAL INFORMATION
Features
- Operates as a blank slot jumper to reserve chassis positions for future modules.
- Supports continuous backplane interrupt signals across empty slot positions.
- Features a single board-mounted connector for backplane engagement.
- Compatible with both standard IC697 CPU racks and IC697 expansion racks.
- Installs into slots 2 through 8 in nine-slot racks.
- Installs into slots 2 through 4 in five-slot racks.
TECHNICAL INFORMATION
Installation Guidelines
- Do not install the IC697ACC722 jumper into slot 1 in any rack configuration.
- Insert the card into slots 2 through 4 in five-slot chassis configurations.
- Insert the card into slots 2 through 8 in nine-slot chassis configurations.
- Align the single board-mounted connector with the corresponding backplane receptacle.
TECHNICAL INFORMATION
Compatibility
- Compatible with General Electric Series 90-70 IC697 CPU racks.
- Compatible with General Electric Series 90-70 IC697 expansion racks.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSCompatible with General Electric Series 90-70 IC697 CPU racks. Compatible with General Electric Series 90-70 IC697 expansion racks.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the primary function of the General Electric IC697ACC722?
The IC697ACC722 reserves unused chassis slots while maintaining continuous backplane interrupt signals in Series 90-70 systems.
Can the IC697ACC722 jumper be installed in rack slot 1?
No. The IC697ACC722 cannot be installed in slot 1 in any rack configuration.
Which rack slots support the IC697ACC722 jumper?
The jumper fits slots 2 through 4 in five-slot racks and slots 2 through 8 in nine-slot racks.
Which rack types are compatible with the IC697ACC722?
The jumper is fully compatible with both IC697 CPU racks and IC697 expansion racks.
