PRODUCT INFORMATION
Product Overview
The General Electric IC697CBL700 is a Series 90-70 Extension Cable Kit. It links two separate rack units to expand hardware capacity across the system architecture. The prewired design routes power distribution without requiring discrete field wiring runs. A factory assembly reduces installation time and minimizes wiring errors during panel integration. This assembly supports consistent distribution across interconnected rack assemblies.
Each kit contains a prewired power supply cable alongside a designated filler faceplate. The included faceplate covers an unoccupied power supply slot inside the rack chassis. For electrical interfacing, the assembly employs a D-type 9-pin connector. The cable transfers 5V control signals and power signals between the racks. The hardware operates across standard power frequencies of 50 Hz and 60 Hz.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Weight | 1.00 lbs (0.45 kg) |
|---|
| Spare Part/Accessory | Yes |
|---|
| Extension Cable Type | Prewired Power Supply Cable |
|---|
| Connections Between 2 Racks | Supported |
|---|
| Kit Contents | Cable and Faceplate |
|---|
| Faceplate Function | Fills unused power supply slot |
|---|
| Connector Type | D-Type 9-Pin Connector |
|---|
| Supported Signals | 5V Control and Power Signals |
|---|
| Frequency | 50/60 Hz |
|---|
| Reset Time | 200 ms |
|---|
| Min. Operating Temperature | 0 degrees Celsius |
|---|
| Max. Operating Temperature | 50 degrees Celsius |
|---|
TECHNICAL INFORMATION
Features
- Provides prewired connections between two Series 90-70 rack units.
- Includes a D-type 9-pin connector for signal distribution.
- Transfers 5V control signals along with system power.
- Supplies a protective faceplate to cover empty power supply slots.
- Supports operating frequencies of 50 Hz and 60 Hz.
- Delivers a fast system reset time rating of 200 milliseconds.
TECHNICAL INFORMATION
Connections / Interfaces
- Equipped with a D-type 9-pin connector for inter-rack links.
- Handles 5V control signals and dedicated power conductors.
TECHNICAL INFORMATION
Installation Guidelines
- Install the prewired cable between the designated rack power interfaces.
- Mount the supplied faceplate over any unused power supply slot.
- Verify operating temperatures remain between 0 and 50 degrees Celsius.
TECHNICAL INFORMATION
Compatibility
- Engineered specifically for General Electric Series 90-70 rack assemblies.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSEngineered specifically for General Electric Series 90-70 rack assemblies.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What items are included in the IC697CBL700 kit?
The kit includes a prewired power supply cable and a filler faceplate for unused slots.
What connector type does the IC697CBL700 cable use?
The cable utilizes a D-type 9-pin connector to interface between two racks.
What signals are transmitted through the IC697CBL700 cable?
The cable conducts 5V control signals and power between connected rack units.
What is the operating temperature range for this cable kit?
The assembly operates in ambient temperatures between 0 degrees Celsius and 50 degrees Celsius.
