PRODUCT INFORMATION
Product Overview
The General Electric IS200IGPAG2AED is a Mark VI / Mark VIe power supply circuit board. This board functions as a gate drive power supply within the control system architecture. It features two distinct sides with asymmetrical component distribution across the printed circuit surface. The primary side contains an inductor coil alongside four electrolytic capacitors and ceramic capacitors. Six heat sink components are arranged in two parallel rows to dissipate thermal energy.
The reverse side remains mostly unpopulated with printed markings indicating component locations. A vertical nine-pin male header connector provides electrical interfacing on this reverse face. Multiple through-hole terminal connectors penetrate the board surface to establish circuit junctions. Diagnostic indicators include edge-mounted LEDs paired with factory-printed nomenclature labels. Dedicated LEDs report 5 V dc and 20 V dc power states along with gating status.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Revision Total | 3 Revisions |
|---|
| Assembly Type | Normal Assembly |
|---|
TECHNICAL INFORMATION
Features
- Features a single vertical nine-pin male header connector for circuit interconnection.
- Contains six dedicated heat sinks configured in two distinct lines.
- Integrates onboard diagnostic LEDs including DS1 through DS8 for visual system verification.
- Utilizes metal film resistors and polyester vinyl capacitors on the populated surface.
- Provides factory-printed nomenclature labels to identify individual voltage rails and gating activity.
TECHNICAL INFORMATION
Connections / Interfaces
- One vertical nine-pin male header connector is positioned on the reverse board surface.
- Several through-hole terminal connectors pass directly through the circuit board substrate.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the primary function of the IS200IGPAG2AED board?
The IS200IGPAG2AED serves as a gate drive power supply in General Electric Mark VI control systems.
What onboard diagnostic indicators are present on the IS200IGPAG2AED?
The board contains diagnostic LEDs labeled DS1 through DS8. These indicators monitor gating states, 5 V dc rails, and 20 V dc rails.
What connectors are located on the unpopulated side of the board?
The unpopulated side houses a vertical nine-pin male header connector. It also contains through-hole terminal connectors drilled through the circuit board.
