PRODUCT INFORMATION
Product Overview
The General Electric IS200STTCH2A is a DIN Rail Thermocouple Board designed for Mark VI and Mark VIe turbine control systems. This terminal card supports both simplex control architecture and triple modular redundant system designs. It provides dedicated termination points for external thermocouple field wiring across industrial turbine applications.
The circuit board mounts directly on standard DIN rails for structured cabinet placement. High-frequency noise suppression is handled by an array of board-mounted capacitors, resistors, and ferrite beads. A 48-position screw terminal strip occupies one board edge to simplify incoming thermocouple wire landing. A female 37-position DC connector is positioned along the opposite edge for system cable interfacing.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Made In | USA |
|---|
| Abbreviation | STTC |
|---|
TECHNICAL INFORMATION
Features
- Configurable for deployment in simplex or triple modular redundant control system topologies.
- Features standard DIN rail mounting for mechanical support and chassis grounding.
- Includes a 48-position screw terminal strip arranged in two rows of 24 connections.
- Equipped with a central 37-position female DC connector for control cable termination.
- Integrates on-board ferrite beads, resistors, and capacitors for high-frequency noise suppression.
- Carries circuit identification markings including 6BA00 and flame-retardant rating 94V-0.
TECHNICAL INFORMATION
Applications
- Thermocouple input termination for General Electric Mark VI turbine control systems.
- Temperature sensor signal landing for General Electric Mark VIe turbine control platforms.
- Simplex and triple modular redundant turbine temperature monitoring installations.
TECHNICAL INFORMATION
Connections / Interfaces
- A 48-position screw terminal strip provides field wiring connections in two 24-point rows.
- One 37-position female DC connector links field thermocouple signals to the control rack.
TECHNICAL INFORMATION
Installation Guidelines
- Mount the board onto a standard industrial DIN rail inside the enclosure.
- Ensure firm mechanical seating to maintain an effective chassis ground connection.
- Route thermocouple wiring cleanly to the 48 screw terminals without excessive wire tension.
- Fasten the 37-position system cable securely to prevent accidental signal disconnection.
TECHNICAL INFORMATION
Configuration Guidelines
- Configure the board according to system design as either a simplex or triple redundant terminal.
- Verify channel assignments in the turbine control system software before commissioning.
TECHNICAL INFORMATION
Compatibility
- Compatible with General Electric Mark VI and Mark VIe turbine control platforms.
- Supports STTC thermocouple terminal card applications in simplex or redundant setups.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSCompatible with General Electric Mark VI and Mark VIe turbine control platforms. Supports STTC thermocouple terminal card applications in simplex or redundant setups.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the function of the General Electric IS200STTCH2A board?
It provides thermocouple field wiring termination for General Electric Mark VI and Mark VIe turbine control systems.
What mounting method does the IS200STTCH2A use?
The board mounts on standard industrial DIN rails, providing mechanical support and chassis ground connection.
What connectors are present on the IS200STTCH2A terminal board?
It includes a 48-position screw terminal strip and one central 37-position female DC connector.
Can the IS200STTCH2A operate in redundant configurations?
Yes, the board supports both simplex architectures and triple modular redundant system configurations.
