PRODUCT INFORMATION
Product Overview
The General Electric IS200VCRCH1BBC is a discrete I/O terminal board designed for Mark VI turbine control systems. It provides the core functionality of a VCCC board without using a daughterboard. This layout allows the module to occupy less rack space inside the VME chassis. Relay outputs cable through the front panel rather than routing directly across a daughterboard assembly.
This board features a single-slot front faceplate fitted with three status LED indicators. The faceplate LEDs show system status in orange, fail in red, and run in green. Two connectors labeled J33 and J44 sit directly on the faceplate surface. The printed circuit board uses conformal coating, two backplane connectors, integrated FPGAs, and dual-port static RAM.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Revision Total | 3 Revisions |
|---|
| Assembly Type | Normal Assembly |
|---|
TECHNICAL INFORMATION
Features
- Occupies a single slot inside the VME chassis without requiring an attached daughterboard.
- Equipped with front-panel LED indicators displaying status, fail, and run states.
- Provides front faceplate cable connectors designated as J33 and J44.
- Populated with two backplane connectors for system rack integration.
- Incorporates onboard FPGA logic, static RAM, and dual-port SRAM devices.
- Features conformal coating for protection in industrial operating environments.
TECHNICAL INFORMATION
Applications
- General Electric Mark VI gas and steam turbine control architectures.
- Discrete input and output management within VME rack systems.
TECHNICAL INFORMATION
Connections / Interfaces
- Front faceplate connectors J33 and J44 for discrete cabling.
- VME rack J3 and J4 ports for relay output signal wiring.
- Two backplane connectors linking the board to the VME carrier rack.
TECHNICAL INFORMATION
Installation Guidelines
- Mount the module into a single dedicated slot within the compatible VME chassis.
- Verify front cable routing to J33 and J44 before locking the faceplate.
- Cable relay outputs through the designated J3 and J4 ports on the chassis.
TECHNICAL INFORMATION
Compatibility
- Compatible with General Electric Mark VI control systems.
- Shares functional discrete signal execution profiles with the VCCC board configuration.
TECHNICAL INFORMATION
Lifecycle / Replacement Information
- Can serve where a compact single-slot board is chosen over the daughterboard-equipped VCCC board.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSCompatible with General Electric Mark VI control systems. Shares functional discrete signal execution profiles with the VCCC board configuration.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the primary function of the IS200VCRCH1BBC?
The IS200VCRCH1BBC processes discrete I/O signals within General Electric Mark VI turbine control systems.
How does the IS200VCRCH1BBC differ from a VCCC board?
The IS200VCRCH1BBC has no daughterboard, saving rack space while routing relay outputs via front ports.
What diagnostic LEDs are present on the front faceplate?
The front faceplate includes three LEDs: orange for status, red for fail, and green for run.
