PRODUCT INFORMATION
Product Overview
General Electric IS200VRTDH1D is a VME RTD Card built for Mark VI Speedtronic turbine control systems. The circuit card acquires input signals from resistance temperature devices. It supports temperature monitoring across gas and steam turbine management installations. The board installs directly into a Mark VI VME rack enclosure.
This card accepts sixteen three-wire RTD inputs through external cabling. Field inputs wire to a dedicated RTD terminal board instead of connecting directly to the card. The printed circuit assembly incorporates conformal coating for environmental protection. Three front faceplate LEDs provide visual Run, Fail, and Status indication.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| PCB Coating | Conformal Coating |
|---|
TECHNICAL INFORMATION
Features
- Accepts sixteen three-wire RTD inputs via external terminal board connections.
- Mounts in a single slot within a standard Mark VI VME rack.
- Features conformal coating across the printed circuit assembly.
- Includes green, red, and orange faceplate LED status indicators.
- Contains over two hundred integrated circuits, including field programmable gate arrays.
TECHNICAL INFORMATION
Applications
- General Electric Speedtronic Mark VI gas turbine management systems.
- General Electric Speedtronic Mark VI steam turbine control systems.
TECHNICAL INFORMATION
Connections / Interfaces
- VME rack interface for internal backplane communication.
- External cable interface linking to a remote RTD terminal board.
- Single-slot faceplate fastened to the circuit board with three screws.
TECHNICAL INFORMATION
Installation Guidelines
- Seat the card into its designated slot within the Mark VI VME rack.
- Secure the faceplate screws to fasten the card to the rack frame.
- Connect cables from the external RTD terminal board to the rack interface.
- Refer to General Electric publication GEH-6421 for detailed installation instructions.
TECHNICAL INFORMATION
Configuration Guidelines
- Configure turbine control software to read the sixteen RTD input channels.
- Consult General Electric manual GEH-6421 for system setup and wiring diagrams.
TECHNICAL INFORMATION
Compatibility
- Compatible with General Electric Mark VI VME rack assemblies.
- Connects to compatible General Electric Mark VI RTD terminal boards.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSCompatible with General Electric Mark VI VME rack assemblies. Connects to compatible General Electric Mark VI RTD terminal boards.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the primary function of the General Electric IS200VRTDH1D card?
It serves as a 16-channel three-wire RTD input card in Mark VI turbine systems.
Do RTD sensor wires connect directly to the IS200VRTDH1D card?
No. Sensors wire to an external RTD terminal board, which connects to the rack via cables.
What LED diagnostic indicators are present on the front panel?
The faceplate has three LED indicators colored green, red, and orange for Run, Fail, and Status.
