PRODUCT INFORMATION
Product Overview
The General Electric IS230JPDMG1B is a Power Distribution Module for Mark VI and Mark VIe systems. This assembly consists of an IS200JPDM base board combined directly with a PPDA I/O pack. The IS200JPDM board receives 28 V dc input power from external ac/dc or dc/dc converters. The unit distributes power directly outward across the control system. It integrates power routing hardware within Mark VIe architecture.
The PPDA I/O pack integrates the IS230JPDMG1B into the wider PDM system feedback. A DC-62 connector establishes the physical link between the JPDM board and the PPDA pack. The module accepts triple modular redundant dc power supplies. It supports simplex redundancy operation within Mark VIe systems. It also handles feedback signals from external distribution boards.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Revision Table | Primary B-Rated Functional |
|---|
| I/O Module Redundancy | Simplex Redundancy |
|---|
| Power Supplies Accepted | TMR DC Power Supplies |
|---|
| Abbreviation | JPDM |
|---|
TECHNICAL INFORMATION
Features
- Combines an IS200JPDM base board with an integrated PPDA I/O pack.
- Receives 28 V dc input power from external ac/dc or dc/dc converters.
- Distributes electrical power across the control system.
- Links the JPDM board and PPDA pack using a DC-62 connector.
- Accepts triple modular redundant dc power supplies.
- Operates with simplex redundancy across system configurations.
TECHNICAL INFORMATION
Applications
- Power distribution across Mark VI and Mark VIe control systems.
- Feedback integration within the central PDM architecture.
TECHNICAL INFORMATION
Connections / Interfaces
- DC-62 connector links the IS200JPDM board directly to the PPDA I/O pack.
- Accepts feedback signal P1 and P2 connectors from JPDB boards.
- Accepts feedback signal P1 and P2 connectors from JPDF boards.
- Accepts feedback signal P1 and P2 connectors from JPDE boards.
TECHNICAL INFORMATION
Installation Guidelines
- Ensure input power lines supply 28 V dc from external converters before termination.
- Verify proper mechanical engagement of the DC-62 connector between the board and pack.
TECHNICAL INFORMATION
Configuration Guidelines
- Integrate the PPDA I/O pack into the PDM system feedback loop.
TECHNICAL INFORMATION
Compatibility
- Compatible with feedback signal P1 and P2 connectors on JPDB boards.
- Compatible with feedback signal P1 and P2 connectors on JPDF boards.
- Compatible with feedback signal P1 and P2 connectors on JPDE boards.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSCompatible with feedback signal P1 and P2 connectors on JPDB boards. Compatible with feedback signal P1 and P2 connectors on JPDF boards. Compatible with feedback signal P1 and P2 connectors on JPDE boards.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What assemblies make up the IS230JPDMG1B power module?
The module comprises an IS200JPDM board and a PPDA I/O pack connected via a DC-62 interface.
What input voltage does the IS230JPDMG1B board require?
The IS200JPDM board receives 28 V dc power from external ac/dc or dc/dc converters.
Which boards provide feedback signals to the IS230JPDMG1B?
The module accepts P1 and P2 feedback signal connectors from JPDB, JPDF, and JPDE boards.
