PRODUCT INFORMATION
Product Overview
The General Electric IC200PWR101 is a VersaMax power supply module. It operates with an alternating-current input voltage of 120/240 Volts AC. The unit provides dual direct-current outputs of 5 Volts DC and 3.3 Volts DC. The total maximum output current across both rails is 1.5 Amperes. This hardware does not provide extended power functionality.
Input power consumption for this module is rated at 27 volt-amperes during operation. The unit features built-in protection against short-circuit and overload conditions. Holdup time is rated at 20 milliseconds to sustain output during temporary interruptions. The 3.3 VDC output provides up to 0.25 Amperes maximum. The 5 VDC rail supports up to 1.5 Amperes minus the 3.3 VDC current used. Total module net weight is 0.63 pounds, or 0.28 kilograms.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Input Voltage | 120/240 VAC |
|---|
| Input Power | 27 VA |
|---|
| Output Voltage | 5 VDC and 3.3 VDC |
|---|
| Total Output Current | 1.5 A maximum |
|---|
| 3.3V Output Current | 0.25 A maximum |
|---|
| 5V Output Current | 1.5 A minus 3.3V current used, maximum |
|---|
| Holdup Time | 20 ms |
|---|
| Protection | Short circuit, overload |
|---|
| Extended Power | No |
|---|
| Weight | 0.63 lbs (0.28 kg) |
|---|
| Lifecycle Status | Active |
|---|
TECHNICAL INFORMATION
Features
- Operates with an input voltage rating of 120/240 VAC.
- Provides dual DC output voltages of 5 VDC and 3.3 VDC.
- Delivers a total maximum output current capacity of 1.5 Amperes.
- Features built-in electrical protection against short circuits and overloads.
- Maintains output regulation across a holdup time of 20 milliseconds.
- Supplies up to 0.25 Amperes on the 3.3 VDC output rail.
TECHNICAL INFORMATION
Installation Guidelines
- Ensure total connected load does not exceed the 1.5 Ampere maximum output rating.
- Account for a 27 VA power requirement from the 120/240 VAC supply.
- Maintain 3.3 VDC current consumption at or below 0.25 Amperes.
TECHNICAL INFORMATION
Lifecycle / Replacement Information
- The IC200PWR101 module maintains an active hardware lifecycle status.
- The IC200PWR101H catalog designation identifies version H of the IC200PWR101 power supply.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What input voltage does the IC200PWR101 power supply accept?
The IC200PWR101 operates on nominal 120/240 VAC electrical power.
What are the output voltage and current ratings of the IC200PWR101?
The module supplies 5 VDC and 3.3 VDC with a total combined maximum current of 1.5 Amperes.
What protection mechanisms are built into the IC200PWR101?
The power supply includes integrated protection against short circuits and overload conditions.
What is the rated holdup time for the IC200PWR101?
The module provides a holdup time of 20 milliseconds during temporary power disruptions.
