PRODUCT INFORMATION
Product Overview
Bently Nevada 330101-00-12-05-02-00 is a 3300 XL 8mm Proximity Probe. The probe forms part of an eddy current transducer system for machinery condition monitoring. It connects directly to standard 3300 XL extension cables and proximity sensors. A TipLoc molding process creates a permanent bond between the probe tip and probe body. The patented CableLoc design provides 330 N of pull strength between cable and tip.
Corrosion-resistant gold-plated ClickLoc connectors provide secure coupling without requiring specialized tools. The connector locking mechanism prevents loosening and produces an audible click when fully tightened. System accuracy is established using an AISI 4140 steel target with a -24 Vdc supply. The standard probe design operates at temperatures up to 177 °C. Optional FluidLoc cable configurations prevent machine oil from leaking through the interior cable core.
TECHNICAL INFORMATION
Features
- TipLoc molding process provides a high-strength bond between tip and probe body.
- CableLoc construction provides 330 N (75 lbf) of cable pull strength.
- Gold-plated ClickLoc coaxial connectors resist corrosion and prevent accidental detachment.
- Connectors lock with finger-tight torque and produce an audible click.
- Calibrated for standard linear response on AISI 4140 steel targets.
- Compatible with 3300 XL extension cables and proximity sensor systems.
TECHNICAL INFORMATION
Applications
- Machinery vibration and position monitoring within industrial eddy current measurement systems.
- Shaft radial vibration measurements on industrial rotating machinery.
- Shaft axial position monitoring in condition monitoring assemblies.
TECHNICAL INFORMATION
Connections / Interfaces
- Miniature male ClickLoc coaxial connector terminates the probe lead cable.
- Locks directly to 3300 XL extension cables with finger-tight torque.
TECHNICAL INFORMATION
Installation Guidelines
- Tighten ClickLoc coaxial connectors by hand until an audible click confirms engagement.
- Never use pliers or mechanical wrenches on coaxial cable connectors.
- Use the four 5/16-inch wrench flats when tightening the probe into threaded mountings.
- Install connector shields or protectors to improve environmental sealing in field installations.
TECHNICAL INFORMATION
Configuration Guidelines
- Calibrate the transducer system against standard AISI 4140 steel target materials.
- Set the nominal physical probe gap to 1.27 mm (50 mils).
- Ensure system power is maintained at -24 Vdc across a 10 kΩ load.
TECHNICAL INFORMATION
Compatibility
- Fully compatible with standard Bently Nevada 3300 XL 8 mm extension cables.
- Interfaces with 3300 XL Proximity Sensors in complete transducer loops.
- Can be used alongside Extended Temperature Range components subject to ETR system accuracy.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSFully compatible with standard Bently Nevada 3300 XL 8 mm extension cables. Interfaces with 3300 XL Proximity Sensors in complete transducer loops. Can be used alongside Extended Temperature Range components subject to ETR system accuracy.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What locking mechanism does the 330101-00-12-05-02-00 probe connector use?
It uses a gold-plated ClickLoc connector that locks securely with finger-tight torque and an audible click.
What target material is required for standard calibrated measurement?
The transducer system achieves standard calibrated performance when targeting AISI 4140 steel surfaces.
What is the market reference price for the 330101-00-12-05-02-00 proximity probe?
Observed market reference pricing spans $208.80 to $435.00 USD. Figures are indicative market reference pricing only and not a final quotation.
