PRODUCT INFORMATION
Product Overview
The General Electric IC660EBD025 is an electronic assembly for IC660BBD025 blocks in the Genius I/O series. It features two 32-circuit DC blocks operating at a nominal voltage of 12 to 24 Volts DC. Source circuits provide 12/24 Volts DC to field output devices. Sink circuits accept 5, 12, or 24 Volts DC and maintain 5 Volt TTL compatibility. All 32 circuits can be configured individually as either inputs or outputs.
The assembly interfaces with 2-wire and 3-wire electronic proximity switches. Output channels power low-power control devices including contactors, lamps, and relays. Output circuits connect directly to input circuits without requiring logic inversion or external components. Built-in protection safeguards each output against shorted loads while tolerating short-time surges. An onboard block LED displays CPU communication status and block operating health.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Block Output Current | 16 Amps |
|---|
| Block to Block Isolation | 850 V |
|---|
| Circuits | 2, 32-circuit |
|---|
| Max. Output turn-on delay | 0.5 microseconds |
|---|
| Maximum Inrush Current | 4 Amps up to 10 microseconds |
|---|
| Maximum Output Current (Steady State) | 0.5 Amps |
|---|
| Non-Condensing Humidity | 5 to 95 percent |
|---|
| Operating Temperature | 0 to 60 degress Celsius |
|---|
| Operating Voltage | 4.9 to 5.3 V DC, 5 V DC supply |
|---|
| Output Diagnostic | Switch Fault |
|---|
| Product Line | Genius I-O |
|---|
| Storage Temperature | -40 to 100 degrees Celsius |
|---|
| Weight | 2.00 lbs (0.91 kg) |
|---|
TECHNICAL INFORMATION
Features
- Configurable 32-circuit layout allows each point to function as an input or output.
- Output circuits connect directly into input circuits without requiring logic inversion.
- Built-in protection handles short-time current surges and protects against shorted loads.
- A block LED indicates operational health and active CPU communications.
- Fault reporting can be enabled or disabled individually on a circuit-by-circuit basis.
- Supports configurable output powerup default states and CPU redundancy modes.
TECHNICAL INFORMATION
Applications
- Interfacing 2-wire and 3-wire DC proximity sensors in industrial machines.
- Direct control of low-power pilot lamps, relays, and contactor coils.
- Distributed digital I/O processing across Genius I/O communications networks.
TECHNICAL INFORMATION
Connections / Interfaces
- Interfaces with 32-circuit source and sink field connections on the terminal block.
- Compatible with 5 Volt TTL, 12 Volt DC, and 24 Volt DC field devices.
- Direct connection is supported between output circuits and input circuits.
TECHNICAL INFORMATION
Installation Guidelines
- Mount the assembly directly onto the mating IC660BBD025 base terminal block.
- Maintain ambient operating temperatures between 0 and 60 degrees Celsius.
- Ensure operating relative humidity remains within 5 to 95 percent non-condensing.
TECHNICAL INFORMATION
Configuration Guidelines
- Assign input or output behavior independently for each circuit in software.
- Enable or disable switch fault reporting on a per-circuit basis.
- Select output powerup default settings and bus switching module control parameters.
TECHNICAL INFORMATION
Compatibility
- Designed specifically for use with General Electric IC660BBD025 terminal blocks.
- Interfaces with standard 2-wire and 3-wire electronic proximity switches.
- Connects to low-power DC control devices including indicator lamps and relays.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSDesigned specifically for use with General Electric IC660BBD025 terminal blocks. Interfaces with standard 2-wire and 3-wire electronic proximity switches. Connects to low-power DC control devices including indicator lamps and relays.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the primary function of the General Electric IC660EBD025?
It serves as the configurable electronic assembly for IC660BBD025 blocks within the Genius I/O family.
Can circuits on the IC660EBD025 operate as inputs or outputs?
Yes. Every circuit can be configured independently to operate as either an input or an output.
What is the indicative market reference price for the IC660EBD025?
Observed market reference pricing spans from $389.00 to $590.00 depending on item condition. This is an indicative market reference only and not a final quotation.
