PRODUCT INFORMATION
Product Overview
The General Electric IC660BBD100 is an AC output block in the Genius I/O series. It operates at 115 Volts AC with a frequency of 50 to 60 Hertz. The unit features eight circuits arranged in one group. Each circuit can act as an input, an output, or a tristate input. The block provides up to sixteen inputs during operation.
Front-panel LED indicators display Unit OK and I/O Enabled operational states. The hardware includes selectable thresholds and integrated diagnostics. Serial controller ports 1 and 2 handle communications. The isolation between the input and ground or serial bus reaches 1500 Volts. The block dissipates up to 28 Watts of heat at full load. It connects to General Electric Series 90-30 and Series 90-70 PLC systems.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Product Line | Genius I-O |
|---|
| Weight | 3.44 lbs (1.56 kg) |
|---|
| Circuits | 8 |
|---|
| Voltage | 115 Volts AC |
|---|
| Isolation Voltage | 1500 Volts |
|---|
| Inputs | 16 |
|---|
| Dissipation | 28 watts |
|---|
| Terminal board rating | 5 Amperes |
|---|
| Temperature | 0-60 degrees Celsius |
|---|
| Frequency | 50/60 Hertz |
|---|
TECHNICAL INFORMATION
Features
- Each circuit acts as an input, an output, or a tristate input.
- Front LEDs display Unit OK and I/O Enabled operating states.
- Isolation between input circuits and ground or serial bus is 1500 Volts.
- Compatible with General Electric Series 90-30 and Series 90-70 PLC systems.
- Equipped with serial controller ports 1 and 2.
TECHNICAL INFORMATION
Applications
- Industrial and manufacturing sector control systems.
- General Electric Series 90-70 automation installations.
- General Electric Series 90-30 automation installations.
TECHNICAL INFORMATION
Connections / Interfaces
- Dual serial controller ports 1 and 2 support communication.
- The top port interfaces with a programmer, controller, or monitoring device.
- The terminal board provides a continuous current rating of 5 Amps.
TECHNICAL INFORMATION
Installation Guidelines
- Operate the block within an ambient temperature range of 0 to 60 degrees Celsius.
- Allow proper ventilation to dissipate up to 28 Watts of heat at full load.
- Maintain wiring isolation of 1500 Volts to ground and the serial bus.
TECHNICAL INFORMATION
Configuration Guidelines
- Attach a personal computer to configure parameters using Microsoft Windows XP.
- Use the top port to connect a programmer, controller, or monitoring device.
- Configure selectable thresholds according to application requirements.
TECHNICAL INFORMATION
Compatibility
- Compatible with General Electric Series 90-70 PLC systems.
- Compatible with General Electric Series 90-30 PLC systems.
- Compatible with external programmer, controller, or monitoring devices via the top port.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSCompatible with General Electric Series 90-70 PLC systems. Compatible with General Electric Series 90-30 PLC systems. Compatible with external programmer, controller, or monitoring devices via the top port.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What circuit modes does the IC660BBD100 block support?
Each circuit can be configured to act as an input, an output, or a tristate input.
Which PLC systems are compatible with the IC660BBD100?
The block connects directly with General Electric Series 90-30 and Series 90-70 PLC systems.
What diagnostic indicators are located on the module?
The unit includes front-panel LED indicators for Unit OK and I/O Enabled status.
What are the electrical isolation and terminal ratings?
Isolation is 1500 Volts to ground or serial bus, and the terminal board rating is 5 Amps.
