PRODUCT INFORMATION
Product Overview
The General Electric IC660EBS102 is an Electronic Assembly for IC660BBS102 in the Genius I/O series. This unit contains four isolated groups with two input and output circuits per group. Each group operates at a nominal voltage of 115 Volts AC or 125 Volts DC. The assembly supports operating levels from 93 to 132 Volts AC and 105 to 132 Volts DC.
Internal control power requires 8 Watts tapped directly from connected input and output device voltages. Every isolated group withstands 250 Volts AC or DC to ground and between adjacent groups. A transient voltage rating protects the circuitry against 2000 Volts peak for up to 10 seconds. Integrated electronic fusing on output circuits shuts down within 5 microseconds during short circuits.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| AC Power | Yes |
|---|
| DC Power | Yes |
|---|
| Frequency | 47 to 63 Hz |
|---|
| Humidity | 5 to 95 percent (non-condensing) |
|---|
| Nominal Voltage | 115 V AC/125 V DC |
|---|
| Operating Temperature | 0 to 60 degrees Celsius |
|---|
| Operating Voltage | 93 to 132 V AC/105 to 132 V DC |
|---|
| Product Line | Genius I-O |
|---|
| Produt Type | Electronics Assembly |
|---|
| Required Control Power | 8 W |
|---|
| Storage Temperature | -40 to 100 degrees Celsius |
|---|
| Weight | 3.44 lbs (1.56 kg) |
|---|
TECHNICAL INFORMATION
Features
- Provides four isolated circuit groups with two configurable input/output circuits each.
- Features selectable input filter times ranging from 10 to 100 milliseconds.
- Includes electronic fusing that interrupts short circuits within 5 microseconds.
- Supports output pulse testing, hold last state, and user-defined power-up defaults.
- Operates with both AC and DC field power sources without external power matching.
- Integrates bus switching module control and CPU redundancy functions for critical loops.
TECHNICAL INFORMATION
Applications
- Discrete AC and DC field signal switching in industrial Genius I/O network installations.
- High-isolation sensing and actuation across circuits with different voltage potentials.
- Industrial automation control loops requiring rapid short-circuit protection and diagnostics.
TECHNICAL INFORMATION
Connections / Interfaces
- Connects directly into the mating IC660BBS102 block terminal base assembly.
- Taps module control power directly from incoming I/O device field terminals.
TECHNICAL INFORMATION
Installation Guidelines
- Seat the electronic assembly firmly onto the compatible terminal block base.
- Ensure ambient operating temperature stays between 0 and 60 degrees Celsius.
- Do not exceed the 250 Volts AC or DC group isolation limit during wiring.
TECHNICAL INFORMATION
Configuration Guidelines
- Set input filter response times between 10 and 100 milliseconds based on line noise.
- Define output hold last state or power-up default values in the system software.
- Enable pulse test capabilities to verify circuit continuity without triggering external field actuators.
TECHNICAL INFORMATION
Compatibility
- Compatible with the General Electric Genius I/O IC660BBS102 terminal block base.
- Operates on standard Genius I/O communications networks with redundant CPU configurations.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSCompatible with the General Electric Genius I/O IC660BBS102 terminal block base. Operates on standard Genius I/O communications networks with redundant CPU configurations.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What terminal base is required for the IC660EBS102 electronics assembly?
The IC660EBS102 installs into the General Electric Genius I/O IC660BBS102 terminal base block.
What are the input and output operating voltages for the IC660EBS102?
It operates at a nominal 115 Volts AC or 125 Volts DC across 93-132 VAC and 105-132 VDC.
How quickly does the electronic fuse respond to short circuits?
The internal electronic fuse shuts down the affected output circuit within 5 microseconds of a short.
How is control power supplied to the IC660EBS102 assembly?
Control power consumes 8 Watts tapped directly from connected I/O device wiring terminals.
