PRODUCT INFORMATION
Product Overview
The General Electric IC200ALG432 is a VersaMax mixed analog module for industrial automation systems. This 12-bit hardware unit provides four analog input channels and two analog output channels. The module features an update rate of 0.4 milliseconds and an input response time of 5 milliseconds. Internal logic operations are handled by an integrated onboard processor.
External power sources feed the output circuits and the transceiver stages for the input channels. The module draws 60 milliamperes from the 5-volt backplane bus during standard control routines. Total current consumption reaches 160 milliamperes under full operational load. Front LED indicators display power flow and active backplane communication status. Built-in diagnostic routines immediately identify any loss of user-side power.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Accuracy at 25 degrees Celsius | +/- 0.3% of full scale |
|---|
| Accuracy at 60 degrees Celsius | +/- 1% maximum |
|---|
| Common Mode Voltage | 0 Volts |
|---|
| Power Consumption | 160 milliamperes |
|---|
| Product Line | Versamax |
|---|
| Resolution | 8 counts |
|---|
| Response Time | 5 milliseconds |
|---|
| Update rate | 0.4 milliseconds |
|---|
| Voltage | 10 Volts DC |
|---|
| Weight | 1.50 lbs (0.68 kg) |
|---|
TECHNICAL INFORMATION
Features
- Provides four analog input channels and two analog output channels.
- Delivers 12-bit data processing with a resolution of 8 counts.
- Maintains an update rate of 0.4 milliseconds across active channels.
- Features an input response time of 5 milliseconds.
- Draws 60 milliamperes from the 5-volt system bus.
- Consumes up to 160 milliamperes total current including external load.
- Includes LED indicators for backplane communication and field power monitoring.
- Supports configurable alarm triggers for monitored field events.
TECHNICAL INFORMATION
Installation Guidelines
- Install the unit in an environment with ambient temperatures not exceeding 60 degrees Celsius.
- Protect the module against airborne pollutants and electromagnetic interference during installation.
- Ensure an external power supply connects properly to energize output circuits.
- Verify that common-mode voltage remains at 0 volts across the analog inputs.
TECHNICAL INFORMATION
Configuration Guidelines
- Configure event-based alarm thresholds within the controller engineering environment.
- Monitor diagnostic indicators to detect field-side power loss quickly.
- Factor operating temperature into calibration routines to maintain target system accuracy.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What I/O capacity does the IC200ALG432 module provide?
The module provides four analog input channels and two analog output channels.
What are the response time and update rates for this unit?
The module has an update rate of 0.4 milliseconds and a 5-millisecond input response time.
What external power is required to operate the IC200ALG432?
The module operates from 10 VDC and requires external power for output circuits and input transceivers.
How does ambient temperature affect module accuracy?
Accuracy is within 0.3 percent at 25 degrees Celsius and reaches 1.0 percent maximum at 60 degrees Celsius.
