PRODUCT INFORMATION
Product Overview
General Electric 269PLUS-DO-100P-120 Multilin Motor Management Relay provides protection for industrial AC motors. The unit adapts to motor operations by learning acceleration times and cool-down rates. These continuously updated parameters are retained inside internal non-volatile memory during control power loss.
This drawout model allows physical removal from service without requiring motor shutdown. Setpoints, operational statistical data, and pre-trip motor values remain secured in non-volatile memory. Drawout models include one set each of alarm, Auxiliary 1, and Auxiliary 2 output contacts. Pairing this relay with a compatible GE Multilin meter enables monitoring of voltage and power metrics.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Manufacturer Location | Ontario, Canada |
|---|
| Software | EnerVista 269 |
|---|
| User Manual | 1601-0013-E4 |
|---|
| Max. Power Consumption | 20 VA |
|---|
| Dust/Moisture Protection | NEMA 12/IP53 with proper installation |
|---|
| Pollution Degree | II |
|---|
| Analog Current Output Isolation | non-isolated, active source |
|---|
| Ground Fault Current Input Conversion | calibrated RMS, sample time 2 ms |
|---|
| Communications Protocol | Subset of Modbus® RTU |
|---|
TECHNICAL INFORMATION
Features
- Drawout case design allows field removal without disconnecting or stopping the operating motor.
- Internal algorithms learn operational acceleration times and motor cool-down rates continuously.
- Non-volatile memory preserves protective setpoints, learned motor data, and pre-trip statistics.
- Drawout architecture provides single contact sets for alarm, Auxiliary 1, and Auxiliary 2 circuits.
- Enables additional protection parameters when combined with an external GE Multilin meter.
TECHNICAL INFORMATION
Applications
- Comprehensive protection and thermal monitoring for three-phase industrial AC motors.
- Continuous motor processes requiring relay service access without interrupting line operations.
- Switchgear integration needing ground fault monitoring and serial communication telemetry.
TECHNICAL INFORMATION
Connections / Interfaces
- Serial communications port utilizing a subset of Modbus RTU protocol.
- Non-isolated active source analog current output interface.
- Terminal connections for alarm, Auxiliary 1, and Auxiliary 2 contact sets.
TECHNICAL INFORMATION
Installation Guidelines
- Follow mechanical procedures documented in instruction manual 1601-0013-D3 for drawout installation.
- Ensure proper panel sealing to achieve NEMA 12 and IP53 environmental ingress protection.
TECHNICAL INFORMATION
Configuration Guidelines
- Configure device parameters and view motor statistics using EnerVista 269 software.
- Calibrate ground fault inputs with the two-millisecond sample time setting.
TECHNICAL INFORMATION
Compatibility
- Operates alongside compatible GE Multilin meters for voltage and reactive power monitoring.
- Uses EnerVista 269 configuration tools for parameter setup and monitoring.
TECHNICAL INFORMATION
Lifecycle / Replacement Information
- Drawout version differs from standard versions in contact configuration and compliance marks.
- Consult instruction manual 1601-0013-D3 for replacement and servicing guidance.
TECHNICAL INFORMATION
Compliance and Certifications
- NEMA 12 and IP53 environmental protection ratings under correct installation.
- Rated for Pollution Degree II operational environments.
- Drawout versions do not meet CE compliance specifications.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSOperates alongside compatible GE Multilin meters for voltage and reactive power monitoring. Uses EnerVista 269 configuration tools for parameter setup and monitoring.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the primary benefit of the drawout version of this relay?
The drawout case allows operators to remove the relay for service without shutting down the motor.
Does the 269PLUS-DO-100P-120 lose setpoints during a power failure?
No. Setpoints, learned motor parameters, statistical data, and pre-trip values remain stored in non-volatile memory.
How do contact outputs differ between drawout and standard versions?
Drawout versions feature only one set each of alarm, Auxiliary 1, and Auxiliary 2 output contacts.
What communications protocol does this motor relay support?
The relay communicates using a subset of the Modbus RTU serial communications protocol.
