PRODUCT INFORMATION
Product Overview
The General Electric IS200TBAIS1C is an Analog Input/Output Terminal Board for the Mark VI / Mark VIe system. This board provides ten unique analog inputs and two analog outputs to the controller assembly. All ten input channels support configuration as either voltage or current signals. The board features an S-style PCB coating for environmental protection.
The IS200TBAIS1C operates in congruence with one to three compatible YAIC Input/Output packs. It interfaces with two-wire, three-wire, and four-wire transmitter analog inputs. Externally powered transmitter inputs are also fully supported on this terminal board. Supported voltage inputs include plus or minus 5 V and plus or minus 10 V direct current. The analog output channels provide standard 0 to 20 mA current loops.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| PCB Coating | S-style PCB coating |
|---|
TECHNICAL INFORMATION
Features
- Provides ten configurable analog input channels and two analog output channels.
- Interfaces with one to three compatible YAIC I/O packs.
- Accepts two-wire, three-wire, and four-wire field transmitter signals.
- Supports externally powered transmitters along with standard loop-powered devices.
- Accommodates voltage inputs of ±5 V DC and ±10 V DC.
- Delivers two 0-20 mA analog output signals to field devices.
- Manufactured with an S-style protective PCB coating.
TECHNICAL INFORMATION
Connections / Interfaces
- Terminal connections accommodate two-wire, three-wire, and four-wire field transmitters.
- Supports connections for externally powered transmitter devices.
- Integrates with one to three YAIC Input/Output packs.
- Outputs provide two 0-20 mA control loops.
TECHNICAL INFORMATION
Configuration Guidelines
- Configure all ten analog input channels as either voltage or current signals.
- Ensure input channel configuration matches connected two-wire, three-wire, or four-wire transmitter hardware.
TECHNICAL INFORMATION
Compatibility
- Designed specifically for General Electric Mark VI and Mark VIe control platforms.
- Connects directly with one to three YAIC Input/Output packs.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSDesigned specifically for General Electric Mark VI and Mark VIe control platforms. Connects directly with one to three YAIC Input/Output packs.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the primary function of the IS200TBAIS1C?
The IS200TBAIS1C provides ten configurable analog inputs and two analog outputs for Mark VIe systems.
Which I/O packs are compatible with the IS200TBAIS1C board?
The terminal board works directly with one to three compatible YAIC Input/Output packs.
What field transmitter types can connect to the IS200TBAIS1C?
It connects to two-wire, three-wire, four-wire, and externally powered field transmitters.
What input signal ranges does the IS200TBAIS1C accept?
Inputs support configurable current signals as well as ±5 V and ±10 V DC voltage signals.
