PRODUCT INFORMATION
Product Overview
The Allen-Bradley 2711P-T6M20D is a PanelView operator interface terminal for industrial automation systems. It features a 5.5-inch grayscale passive matrix display with 320 x 240 pixel resolution. The unit includes an analog resistive touchscreen with an operational lifespan of one million actuations. Power input requires 24V DC nominal voltage within an 18 to 30V DC operating range.
Integrated communication interfaces include one Ethernet port, one RS-232 serial port, and two USB ports. These interfaces enable communication with controllers using EtherNet/IP, DF1, and DH485 protocol standards. Operating temperature ratings range between 0 and 55 degrees Celsius. The terminal operates at relative humidity levels between 5 and 95 percent non-condensing. Maximum operating altitude is rated up to 2000 meters above sea level.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Category | Panelviews |
|---|
| UPC | 781180130243 |
|---|
| Weight | 2.31 lbs (1.05 kg) |
|---|
| Operator Input | Touch |
|---|
| Display Type | Grayscale passive matrix, film compensated super-twist nematic (FSTN) |
|---|
| Display Size | 5.5 in. |
|---|
| Display Area | 112 x 84 mm (4.4 x 3.3 in.) |
|---|
| Resolution | 320 x 240 |
|---|
| Touch interface | Analog resistive |
|---|
| Operating force | 10…110 g |
|---|
| Actuating lifespan | 1 million presses |
|---|
| Terminal Memory | Series A: 5 MB Series B: 10 MB |
|---|
| Communication ports | Ethernet, RS-232, 2 USB host |
|---|
| Power Supply Input Voltage range | 18-30VDC |
|---|
| Power Consumption | 25 W max (1.0 A at 24V DC) |
|---|
| Module Type | Operator Interface Terminal |
|---|
| Input Type | Touchscreen |
|---|
| Power Supply | 24 Volts DC |
|---|
| Communication | RS-232, USB, 2 Ethernet ports |
|---|
| Display | 5.7-inch Monochrome |
|---|
| Open Architecture | Yes |
|---|
| Product Lifecycle Status* | Discontinued/Obsolete |
|---|
TECHNICAL INFORMATION
Features
- Monochrome FSTN display screen measuring 5.5 inches with 320 x 240 resolution.
- Analog resistive touchscreen interface supporting an actuating force between 10 and 110 grams.
- Non-replaceable backlight providing 300 cd/m2 luminance with a 50,000-hour service life.
- Embedded Ethernet, RS-232 serial, and two USB peripheral connections.
- Internal memory configuration provides 5 MB on Series A and 10 MB on Series B hardware.
TECHNICAL INFORMATION
Applications
- Machine-level human-machine interface monitoring for industrial manufacturing equipment.
- Operator process visualization for programmable logic controllers and automation systems.
- Serial DF1 and DH485 protocol data acquisition in legacy controller setups.
TECHNICAL INFORMATION
Connections / Interfaces
- One RJ45 Ethernet port for local network and EtherNet/IP controller communications.
- One RS-232 serial port for DF1 or DH485 communication protocols.
- Two USB host ports for peripheral devices including external keyboards and mice.
TECHNICAL INFORMATION
Installation Guidelines
- Mount the operator terminal into a flat panel opening using standard flush-mounting procedures.
- Maintain ambient operating temperatures between 0 and 55 degrees Celsius inside the enclosure.
- Ensure the operating altitude remains below 2000 meters above sea level.
TECHNICAL INFORMATION
Configuration Guidelines
- Configure serial drivers for either DF1 or DH485 protocols depending on controller settings.
- Set the network IP address via the terminal system settings menu for Ethernet communication.
- Operate the touchscreen using a stylus or gloved finger to reduce surface contamination.
TECHNICAL INFORMATION
Compatibility
- Connects with Allen-Bradley programmable controllers via EtherNet/IP, DF1, or DH485 networks.
- Supports standard USB human interface devices including keyboards and pointing devices.
TECHNICAL INFORMATION
Lifecycle / Replacement Information
- The 2711P-T6M20D operator terminal is classified as discontinued and obsolete by the manufacturer.
- Aituos Controls supplies tested replacement units and legacy hardware support for active maintenance programs.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSConnects with Allen-Bradley programmable controllers via EtherNet/IP, DF1, or DH485 networks. Supports standard USB human interface devices including keyboards and pointing devices.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What display type does the 2711P-T6M20D terminal utilize?
The terminal uses a 5.5-inch monochrome FSTN grayscale passive matrix display with 320 x 240 resolution.
What input power is required to operate the 2711P-T6M20D?
The terminal operates on 24V DC nominal power with an acceptable input voltage range of 18 to 30V DC.
What communication interfaces are integrated into this operator terminal?
The hardware includes an RJ45 Ethernet port, an RS-232 serial communication port, and two USB host ports.
What is the lifecycle status and availability of the 2711P-T6M20D?
The terminal is discontinued by the manufacturer. Replacement units are available through specialized industrial automation stockists.
