PRODUCT INFORMATION
Product Overview
The Allen-Bradley 2711P-RC3 is a PanelView CompactFlash Card providing non-volatile data storage. It offers 256 MB of storage capacity using NAND flash technology. A standard 50-pin female CF edge connector mates with compatible terminal slots. The card provides sequential read throughput between 10 MB/s and 15 MB/s. Sequential write rates range from 5 MB/s to 8 MB/s for application files.
This memory card operates at 5V DC and draws 25 mA during active cycles. Internal error correction code logic helps preserve integrity during read and write transfers. Enclosure ratings include NEMA Type 12, 13, and 4X for indoor operating conditions. The design meets IP54 and IP65 ingress protection standards when installed. It functions in ambient temperatures from 0 °C to 55 °C.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Weight | 0.06 lbs (0.03 kg) |
|---|
| UPC | 662073088363 |
|---|
| Memory Capacity | 256 MB |
|---|
| Memory Technology | NAND Flash |
|---|
| Connector Type | 50‑pin female CF edge connector |
|---|
| Sequential Read Speed | 10–15 MB/s |
|---|
| Sequential Write Speed | 5–8 MB/s |
|---|
| Data Reliability | Built-in ECC |
|---|
| Operating Voltage | 5V DC |
|---|
| Power Consumption (Active) | 25 mA |
|---|
| Enclosure Ratings | NEMA Type 12, 13, 4X (Indoor use only), IP54, IP65 |
|---|
| Altitude | 2000 m |
|---|
| Operating Humidity | 5 % to 95 % (non-condensing) |
|---|
| Shock, Operating | 15 g |
|---|
| Operating Temperature | 0 °C to 55 °C |
|---|
TECHNICAL INFORMATION
Features
- 256 MB memory capacity using NAND flash architecture.
- 50-pin female CompactFlash edge connector interface.
- Active power consumption of 25 mA at 5V DC.
- Sequential read transfer rates between 10 MB/s and 15 MB/s.
- Sequential write transfer rates between 5 MB/s and 8 MB/s.
- Built-in error correction code for data storage integrity.
- Certified for operational shock resistance up to 15 g.
TECHNICAL INFORMATION
Connections / Interfaces
- 50-pin female CompactFlash edge connector for card receptacle insertion.
TECHNICAL INFORMATION
Installation Guidelines
- Align the 50-pin connector with the terminal CompactFlash card slot before insertion.
- Do not force the card into the slot to avoid bending connector pins.
- Ensure ambient operational conditions remain between 0 °C and 55 °C.
TECHNICAL INFORMATION
Compliance and Certifications
- NEMA Type 12, 13, and 4X rated for indoor industrial deployments.
- Meets IP54 and IP65 ingress protection ratings.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the memory capacity of the Allen-Bradley 2711P-RC3?
The 2711P-RC3 card provides 256 MB of NAND flash storage capacity.
What connector interface does the 2711P-RC3 use?
The card utilizes an industry-standard 50-pin female CompactFlash edge connector.
What are the power requirements of the 2711P-RC3 card?
The card requires 5V DC operational voltage and consumes 25 mA while active.
What environmental ratings apply to the 2711P-RC3?
It holds NEMA Type 12, 13, and 4X indoor ratings plus IP54 and IP65 protection.
