PRODUCT INFORMATION
Product Overview
The General Electric IC694PWR330 is a PACSystems RX3i power supply module. It operates across an AC input range of 85 to 264 volts. The unit also accepts a DC input range of 100 to 300 volts. It features a current rating of 2 amps. The device handles a maximum input power of 50 watts. An isolated 24 V DC output delivers up to 20 watts.
The module provides 1500 VAC electrical isolation for equipment protection. Integrated overvoltage and overcurrent protection circuits safeguard internal hardware. Visual monitoring is supported by front PWR, OK, and RUN LEDs. Terminal connection hardware requires a torque rating of 1.3 N-m. The unit maintains a 20-millisecond hold-up time during voltage fluctuations. It functions in operating temperatures from 0 °C to 60 °C.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Weight | 1.88 lbs (0.85 kg) |
|---|
| UPC | 444765471796 |
|---|
| AC Input Voltage | 85 to 264 Volts AC |
|---|
| DC Input Voltage | 100 to 300 Volts DC |
|---|
| Torque Rating | 1.3 N-m |
|---|
| Current Rating | 2 Amps |
|---|
| Maximum Input Power | 50 W |
|---|
| Isolation | 1500 VAC |
|---|
| Hold-up Time | 20 ms |
|---|
| Protection Features | Overvoltage and Overcurrent Protection |
|---|
| LED Status Indicators | PWR, OK, RUN LEDs |
|---|
| 24 V DC Isolated Output | Up to 20 W |
|---|
| Environmental Ratings | 5 % to 95 % Humidity |
|---|
| Operating Temperature | 0 °C to 60 °C |
|---|
| Storage Temperature | –40 °C to +85 °C |
|---|
TECHNICAL INFORMATION
Features
- Accepts 85 to 264 VAC and 100 to 300 VDC input ranges.
- Delivers an isolated 24 V DC output rated up to 20 watts.
- Maintains a 20-millisecond hold-up time during line disruptions.
- Includes built-in overvoltage and overcurrent protection.
- Features PWR, OK, and RUN front status LED indicators.
- Provides electrical isolation rated at 1500 VAC.
TECHNICAL INFORMATION
Applications
- Power distribution across PACSystems RX3i rack assemblies.
- Industrial control cabinets requiring flexible AC or DC input options.
- Field peripheral power supply using the isolated 24 V DC output.
TECHNICAL INFORMATION
Connections / Interfaces
- Screw terminal blocks requiring a tightening torque of 1.3 N-m.
- Dedicated connections for AC/DC input power and 24 V DC isolated output.
TECHNICAL INFORMATION
Installation Guidelines
- Fasten all terminal screw connections to the specified 1.3 N-m torque.
- Maintain an ambient operating temperature between 0 °C and 60 °C.
- Operate within non-condensing relative humidity levels of 5% to 95%.
TECHNICAL INFORMATION
Configuration Guidelines
- Verify that input power matches either 85–264 VAC or 100–300 VDC.
- Observe PWR, OK, and RUN LEDs to verify normal backplane operation.
TECHNICAL INFORMATION
Compatibility
- Compatible with General Electric PACSystems RX3i backplanes.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSCompatible with General Electric PACSystems RX3i backplanes.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What input voltages are supported by the IC694PWR330?
The module supports 85 to 264 VAC and 100 to 300 VDC.
Does the IC694PWR330 provide auxiliary field power?
Yes, it provides an isolated 24 V DC output delivering up to 20 watts.
What is the hold-up time specification for this power supply?
The module provides a 20-millisecond hold-up time during power disruptions.
What torque rating is required for terminal connections?
Terminal screw connections require a torque rating of 1.3 N-m.
