PRODUCT INFORMATION
Product Overview
The General Electric IC660BCM501 is a dedicated Battery Charger engineered for the Genius I/O system family. This charging unit supplies power to the rechargeable battery inside the IC660HHM501 hand-held monitor. It operates with a rated AC input voltage of either 115 or 230 volts. The power input accommodates utility frequencies ranging from 47 to 63 Hertz. A physical voltage selection switch enables quick adaptation to local power supply configurations.
The unit is engineered to recharge nickel-cadmium batteries efficiently and safely. A minimum charging time of 15 minutes enables rapid availability for urgent field tasks. A complete full charge cycle requires up to 6 hours of continuous operation. Batteries serviced by this charger achieve an operating life span of up to two years. The charger features an integrated 8-foot power cord and operates between 0 and 60°C.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Weight | 1.31 lbs (0.60 kg) |
|---|
| UPC | 900201889247 |
|---|
| Minimum Charging Time | 15 minutes |
|---|
| Compatibility | IC660HHM501 Hand-held Monitor |
|---|
| System Frequency | 47 to 63 Hertz |
|---|
| Rated Input Voltage | 115/230 Volts AC |
|---|
| Maximum Charging Time for the Battery | 6 hours for fully charged operation |
|---|
| Voltage Selection Type | Voltage Switch |
|---|
| Cord Length | 8 feet (2.43 meters) |
|---|
| Battery Type | Nickel-Cadmium Battery |
|---|
| Battery Life Span | Up to 2 years for continuous operation |
|---|
| Ambient Operating Temperature | 0 to 60°C (32°F to 140°F) |
|---|
TECHNICAL INFORMATION
Features
- Compatible with the General Electric IC660HHM501 Genius I/O hand-held monitor.
- Selectable input voltage supporting 115 VAC or 230 VAC via an integrated switch.
- Accepts alternating current line frequencies from 47 to 63 Hertz.
- Rapid minimum charge cycle of 15 minutes for urgent field availability.
- Full charging duration of 6 hours for complete battery replenishment.
- Formulated specifically for charging nickel-cadmium battery chemistries.
- Supplied with an integrated 8-foot (2.43-meter) power cord.
- Ambient operating temperature envelope spanning 0 to 60°C (32°F to 140°F).
TECHNICAL INFORMATION
Applications
- Power maintenance for Genius I/O IC660HHM501 hand-held monitors.
- Field servicing and diagnostics in industrial automation facilities.
- Routine battery replenishment for portable Genius I/O programming terminals.
TECHNICAL INFORMATION
Connections / Interfaces
- Integrated 8-foot (2.43-meter) AC line cord for utility power connection.
- Dedicated charging connector mating with the IC660HHM501 monitor interface.
TECHNICAL INFORMATION
Installation Guidelines
- Verify the voltage selection switch matches the supply voltage before energizing.
- Set the switch to 115 VAC or 230 VAC prior to plugging in.
- Operate the unit within the specified ambient temperature range of 0 to 60°C.
- Ensure adequate air circulation around the housing during charging.
TECHNICAL INFORMATION
Configuration Guidelines
- Select the appropriate operating voltage on the physical selector switch before connection.
- Do not adjust the voltage switch while the charger is plugged into mains power.
TECHNICAL INFORMATION
Compatibility
- General Electric IC660HHM501 Genius I/O hand-held monitor.
- Nickel-cadmium battery packs integrated within the IC660HHM501 unit.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSGeneral Electric IC660HHM501 Genius I/O hand-held monitor. Nickel-cadmium battery packs integrated within the IC660HHM501 unit.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What device is compatible with the General Electric IC660BCM501 charger?
The IC660BCM501 charges the General Electric IC660HHM501 Genius I/O hand-held monitor. It supports the internal nickel-cadmium battery pack.
What input voltage does the IC660BCM501 battery charger require?
The charger accepts 115 VAC or 230 VAC at 47 to 63 Hz. Users select the voltage using an onboard switch.
How long does it take to charge a battery using the IC660BCM501?
A rapid charge takes a minimum of 15 minutes. A full charge cycle requires up to 6 hours.
