PRODUCT INFORMATION
Product Overview
The General Electric DS200TCPDG2B is a Power Distribution Module for the Mark V turbine control system series. This board distributes operating power across turbine control drive assemblies. Supported systems include wind, steam, and gas turbine installations. The Mark V platform utilizes patented Speedtronic control system technology. This board features a singular B-rated functional product revision.
The printed circuit board assembly includes 8 toggle switches, 36 protective fuses, and 36 OK diagnostic status LEDs. It provides 4 screw-retained signal wire terminals and one 10-pin connector for circuit integration. The board features normal protective PCB coating for standard panel deployment. Onboard toggle switches allow operators to direct power across designated Mark V control cores.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| PCB Coating | Normal Coating |
|---|
TECHNICAL INFORMATION
Features
- Contains 8 toggle switches labeled SW1 through SW8 for core power routing.
- Includes 36 protective fuses paired with 36 individual OK status indication LEDs.
- Provides 4 screw-retained signal wire terminals labeled AC1N, AC1H, AC2N, and AC2H.
- Equipped with one onboard 10-pin connector for system wiring integration.
- Manufactured with normal PCB coating for turbine control cabinet placement.
TECHNICAL INFORMATION
Applications
- Power distribution in General Electric Mark V Speedtronic turbine control cabinets.
- Management and control systems of compatible gas turbine automated drive assemblies.
- Operational speed and drive management in compatible steam turbine installations.
- Turbine control system management in compatible wind turbine assemblies.
TECHNICAL INFORMATION
Connections / Interfaces
- Signal wire terminal AC1N with screw retention.
- Signal wire terminal AC1H with screw retention.
- Signal wire terminal AC2N with screw retention.
- Signal wire terminal AC2H with screw retention.
- One onboard 10-pin connector for internal circuit interface.
TECHNICAL INFORMATION
Installation Guidelines
- Examine the signal wire terminals and note each factory terminal identification label.
- Tag each connected wire with its corresponding terminal identifier before disconnecting.
- Loosen the terminal screws with a screwdriver to release each signal wire.
- Loosen terminal screws on the replacement board to open wire entry points.
- Insert matching tagged wires into terminals AC1N, AC1H, AC2N, and AC2H.
- Tighten terminal screws and gently tug each wire to verify mechanical retention.
TECHNICAL INFORMATION
Configuration Guidelines
- Switches SW1 through SW5 select power for control cores R1 through R5.
- Switch SW6 selects power for the P1 Core X circuit.
- Switch SW7 selects power for the P1 Core Y circuit.
- Switch SW8 selects power for the P1 Core Z circuit.
TECHNICAL INFORMATION
Compatibility
- General Electric Mark V Speedtronic turbine control systems.
- Compatible with installations using the parent DS200TCPDG2 board architecture.
TECHNICAL INFORMATION
Lifecycle / Replacement Information
- The DS200TCPDG2B represents a B-rated functional revision of the parent DS200TCPDG2 board.
- Direct board replacement requires transferring signal wires to matching terminal IDs.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSGeneral Electric Mark V Speedtronic turbine control systems. Compatible with installations using the parent DS200TCPDG2 board architecture.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the primary function of the General Electric DS200TCPDG2B?
The DS200TCPDG2B serves as a power distribution board within Mark V turbine control systems.
Which toggle switches are present on the DS200TCPDG2B module?
The board features SW1 through SW5 for cores R1-R5 and SW6 through SW8 for core P1.
What factory terminal IDs are provided on the DS200TCPDG2B board?
The board provides four screw-type signal wire terminals labeled AC1N, AC1H, AC2N, and AC2H.
How are field signal wires replaced on the DS200TCPDG2B?
Tag each wire with its terminal ID before loosening screws and transfer to identical replacement terminals.
