PRODUCT INFORMATION
Product Overview
The General Electric DS200TCPSG1A is a DC input power supply board for Mark V turbine control systems and drive assemblies. It operates under the functional acronym TCPS within the product line. This circuit board provides regulated power distribution across the automated control rack. Hardware revisions include an A-rated functional modification on the base printed circuit board assembly. A normal protective coating shields the onboard traces and electronic components against industrial environments.
The assembly integrates three protective fuses to guard internal circuits against sudden overcurrent events and electrical irregularities. Circuit connectivity is established through one 16-pin connector and one 9-pin connector. Multiple onboard test points allow service personnel to verify circuit health during diagnostic routines. Four mounting screws secure the assembly directly inside the metal equipment rack. Technicians can replace blown fuses directly without removing the entire board if rack accessibility permits.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Functional Product Acronym | TCPS |
|---|
| PCB Coating Type | Normal Coating |
|---|
| 1st Functional Revision | A |
|---|
TECHNICAL INFORMATION
Features
- Three onboard protective fuses defend circuits against overcurrent damage and current irregularities.
- One 16-pin connector provides multi-conductor system interface wiring.
- One 9-pin connector provides dedicated control and power connections.
- Multiple test points facilitate quick hardware troubleshooting and signal verification.
- Normal PCB protective coating safeguards surface-mount and through-hole components.
- Secured into standard drive racks using four mechanical mounting screws.
TECHNICAL INFORMATION
Applications
- General Electric Mark V turbine control drive assemblies.
TECHNICAL INFORMATION
Connections / Interfaces
- One 16-pin wiring connector.
- One 9-pin wiring connector.
- Multiple integrated circuit test points for voltage and continuity testing.
TECHNICAL INFORMATION
Installation Guidelines
- Safely disengage power from the host drive before handling the board or servicing fuses.
- Qualified personnel must verify zero-voltage state prior to hardware removal.
- Fasten the board securely using four mounting screws within the metal rack.
- Ensure replacement fuses match exact OEM current and voltage ratings before energizing.
TECHNICAL INFORMATION
Compatibility
- General Electric Mark V control assemblies and drive systems.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSGeneral Electric Mark V control assemblies and drive systems.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the primary role of the DS200TCPSG1A board?
The DS200TCPSG1A functions as a DC input power supply board in General Electric Mark V control assemblies.
What should be checked first if the DS200TCPSG1A stops functioning?
Technicians should first inspect the three onboard protective fuses for open circuits or damage caused by overcurrent.
Can fuses be replaced without taking out the DS200TCPSG1A?
Yes, fuses can be replaced directly if physical clearance allows access inside the rack.
What connector types are present on the DS200TCPSG1A board?
The board includes one 16-pin connector and one 9-pin connector along with multiple diagnostic test points.
