PRODUCT INFORMATION
Product Overview
The Woodward MicroNet 5466-1050 is a MicroNet Simplex 48/24 HDDIO Smart-Plus discrete interface unit. This hardware unit provides circuitry for forty-eight discrete inputs and twenty-four discrete outputs. The module operates inside Woodward MicroNet digital controllers. It functions within either Full-Size or Narrow chassis architectures. All discrete contact inputs on this module accept dry contacts. The low-state input threshold requires less than 8 Vdc at 1.5 mA.
The 5466-1050 module supports hot replacement without removing control power. Technicians can service the module while the controller remains online. Field circuits accommodate external wetting voltages of 18 to 32 VDC or 100 to 150 VDC. Each unit accommodates one input voltage range depending on UL or LVD standards. The faceplate contains no potentiometers and requires no manual calibration.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Storage Temperature | -40 to +221°F |
|---|
| Air Quality | Pollution Degree 2 |
|---|
| Input Voltage | < 8 Vdc at 1.5 mA = “OFF” |
|---|
| Chassis | Full-Size or Narrow |
|---|
TECHNICAL INFORMATION
Features
- Provides forty-eight discrete inputs and twenty-four discrete outputs.
- Accepts dry contacts across all discrete input channels.
- Permits hot replacement without removing power from the control.
- Eliminates manual adjustments with a potentiometer-free front faceplate.
- Accepts external wetting sources of 18-32 VDC or 100-150 VDC.
TECHNICAL INFORMATION
Applications
- Discrete input and output management in Woodward MicroNet digital control systems.
- Simplex I/O processing within Full-Size or Narrow MicroNet chassis.
TECHNICAL INFORMATION
Connections / Interfaces
- Slides into the chassis card guide and connects directly to the motherboard.
- Connects to one 24 VDC FTM through two High-Density Analog/Discrete cables.
TECHNICAL INFORMATION
Installation Guidelines
- Slide the module into the card guide of the chassis.
- Seat the unit firmly into the chassis motherboard connector.
- Maintain Pollution Degree 2 air quality within the enclosure.
TECHNICAL INFORMATION
Configuration Guidelines
- Configure discrete inputs for 125 VDC UL or 24 VDC LVD and UL standards.
- Select external wetting sources of 18-32 VDC or 100-150 VDC.
TECHNICAL INFORMATION
Compatibility
- Woodward MicroNet Full-Size chassis.
- Woodward MicroNet Narrow chassis.
TECHNICAL INFORMATION
Lifecycle / Replacement Information
- Replace malfunctioning units using the identical 5466-1050 part number without adjustments.
TECHNICAL INFORMATION
Compliance and Certifications
- UL compliant for 125 VDC input voltage operation.
- LVD and UL compliant for 24 VDC input voltage operation.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSWoodward MicroNet Full-Size chassis. Woodward MicroNet Narrow chassis.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
Does the Woodward 5466-1050 module require manual calibration?
No. The module contains no potentiometers and needs no calibration adjustments.
Can the 5466-1050 unit be replaced while the controller is powered?
Yes. The simplex module supports hot replacement without removing power from the control.
What external wetting voltage ranges does this module support?
It supports an external source of 18-32 VDC or 100-150 VDC.
What is the reference price for the Woodward 5466-1050?
Pricing varies with condition and availability. Stated figures are indicative market reference pricing only and are not a final quotation.
