PRODUCT INFORMATION
Product Overview
The ABB AO810V2 3BSE038415R1 is an S800 I/O Analog Output Module designed for process automation. It provides eight unipolar analog output channels operating at 0 to 20 mA or 4 to 20 mA. Digital-to-analog converter communication is supervised by reading back and verifying serial data cyclically. Open-circuit conditions are detected during this readback operation. Supervision detects external process power faults if supply voltage drops too low.
The module delivers 14-bit resolution across all channels with groupwise isolation from ground. Field outputs feature short-circuit proof current limiting and support cable lengths up to 600 meters. Diagnostics report channel faults when output current drops below setpoints above 1 mA. Status LEDs indicate fault, run, warning, and output set as predetermined states.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Number of Channels | 8 |
|---|
| Current Output Range | 0 to 20 mA, 4 to 20 mA |
|---|
| Resolution | 14 bit |
|---|
| Isolation | Groupwise isolated from ground |
|---|
| Rated Insulation Voltage | 50 V |
|---|
| Dielectric Test Voltage | 500 V AC |
|---|
| Output Load | ≤ 500 Ω (L1+ only), 250 to 850 Ω (L2+ only) |
|---|
| Accuracy Error | Max 0.1% at 0 to 500 Ω |
|---|
| Temperature Drift | Typ. 30 ppm/°C, Max 60 ppm/°C |
|---|
| Rise Time | 0.35 ms (PL = 500 Ω) |
|---|
| Update Cycle Time | ≤ 2 ms |
|---|
| Power Dissipation | 2.3 W |
|---|
| Current Consumption +5V Modulebus | Max 70 mA |
|---|
| Current Consumption +24V External | 245 mA |
|---|
| Front LEDs | Fault, Run, Warning, OSP |
|---|
| Operating Temperature | 0 to +55 °C (Approvals +5 to +55 °C) |
|---|
| Storage Temperature | -40 to +70 °C |
|---|
| Relative Humidity | 5 to 95 %, non-condensing |
|---|
| Protection Class | IP20 (IEC 60529) |
|---|
| Corrosion Protection | ISA-S71.04: G3 |
|---|
| Compatible MTUs | TU810, TU812, TU814, TU830, TU833 |
|---|
| Keying Code | AE |
|---|
TECHNICAL INFORMATION
Features
- Provides eight unipolar 0 to 20 mA or 4 to 20 mA current outputs.
- Features 14-bit digital-to-analog conversion resolution.
- Includes cyclical self-diagnostics with serial readback verification.
- Monitors external process power supply voltage levels.
- Detects open circuits on active channels above 1 mA.
- Short-circuit proof current-limited channel design.
TECHNICAL INFORMATION
Connections / Interfaces
- Mounts onto Module Termination Units including TU810, TU812, TU814, TU830, and TU833.
- Uses mechanical keying code AE to prevent improper module insertion.
- Connects to Modulebus backplanes consuming up to 70 mA at 5 V.
- Requires an external 24 V DC power source consuming 245 mA.
- Supports maximum field wiring cable runs up to 600 meters.
TECHNICAL INFORMATION
Installation Guidelines
- Snap the unit into an approved MTU base until latched.
- Ensure mechanical key AE matches the base socket configuration.
- Maintain ambient temperatures below 55 °C for standard horizontal mounting.
- Limit ambient operating temperature to 40 °C during vertical mounting.
- Provide groupwise grounding in compliance with Class I equipment standards.
TECHNICAL INFORMATION
Compatibility
- Compatible with ABB TU810, TU812, and TU814 compact MTUs.
- Compatible with ABB TU830 and TU833 extended MTUs.
- Integrates into ABB S800 I/O clusters on ABB Advant and 800xA systems.
TECHNICAL INFORMATION
Compliance and Certifications
- Electrical safety compliant with EN 61010-1 and UL 61010-1.
- Certified for hazardous locations under Class 1 Div 2 and ATEX Zone 2.
- Marine certifications include ABS, BV, DNV, LR, and CCS.
- Meets EMC requirements per EN 61000-6-4 and EN 61000-6-2.
- RoHS compliant according to EU, UAE, and CN regulations.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSCompatible with ABB TU810, TU812, and TU814 compact MTUs. Compatible with ABB TU830 and TU833 extended MTUs. Integrates into ABB S800 I/O clusters on ABB Advant and 800xA systems.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the primary function of the ABB AO810V2 3BSE038415R1?
It outputs eight unipolar current signals between 0 to 20 mA or 4 to 20 mA for control devices.
Which Module Termination Units work with the AO810V2?
The module is compatible with ABB MTU models TU810, TU812, TU814, TU830, and TU833 using keying code AE.
How does the AO810V2 detect channel and loop faults?
It cyclically reads back serial data to detect open circuits and monitors low process power supply voltage.
What is the reference price for the AO810V2 module?
Observed market reference pricing is approximately $859 USD. This is an indicative reference only, not a final quotation.
