PRODUCT INFORMATION
Product Overview
The ABB DO810 3BSE008510R1 is a 16-channel Digital Output Module designed for the S800 I/O system. It delivers current-sourcing digital outputs rated at 24 V DC with up to 0.5 A continuous current per channel. The output channels are arranged into two individually isolated groups containing eight channels each.
Each group includes an independent process voltage supervision input to detect supply loss. Channels integrate short-circuit and over-temperature protection with optical isolation from the ModuleBus interface. Fault and diagnostic statuses transmit directly through the ModuleBus communication link to the system controller.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Number of Channels | 16 |
|---|
| Signal Specification | 24 V DC (12 to 32 V DC), 0.5 A |
|---|
| Signal Type | Current sourcing, current limiting |
|---|
| Channel Isolation | Groupwise isolated from ground (2 groups of 8) |
|---|
| Dielectric Test Voltage | 500 V AC |
|---|
| Rated Insulation Voltage | 50 V |
|---|
| Power Dissipation | Typ. 2.1 W |
|---|
| ModuleBus Current Consumption (+5 V) | 80 mA |
|---|
| Output Load | < 0.4 Ω |
|---|
| Maximum Field Cable Length | 600 m |
|---|
| Protection Class | IP20 (IEC 60529) |
|---|
| Operating Temperature | 0 to +55 °C |
|---|
| Storage Temperature | -40 to +70 °C |
|---|
| Relative Humidity | 5 to 95 %, non-condensing |
|---|
| Keying Code | AA |
|---|
TECHNICAL INFORMATION
Features
- Provides 16 current-sourcing output channels rated for 24 V DC operation.
- Configured into two isolated groups of eight channels each.
- Contains short-circuit and over-temperature protection on every channel.
- Monitors field power through dedicated process voltage supervision inputs.
- Includes LED indicators for run, fault, warning, and individual channel status.
TECHNICAL INFORMATION
Connections / Interfaces
- Connects via proprietary ModuleBus backplane communication.
- Interfaces with field wiring through compatible S800 termination units.
TECHNICAL INFORMATION
Installation Guidelines
- Align the module with mechanical keying code AA on the termination unit.
- Verify termination unit compatibility before inserting the module into the base.
- Maintain ambient operating temperatures below 55 degrees Celsius for horizontal mounting.
- Derate maximum ambient temperature to 40 degrees Celsius for vertical mounting configurations.
TECHNICAL INFORMATION
Compatibility
- Operates within ABB S800 I/O stations.
- Mounts directly onto TU810, TU812, TU814, or TU830 Module Termination Units.
- Communicates across the proprietary ABB ModuleBus interface.
TECHNICAL INFORMATION
Compliance and Certifications
- CE marked and compliant with EN 61000-6-2 and EN 61000-6-4 EMC directives.
- Certified for hazardous locations under Class I Division 2 and ATEX Zone 2.
- Certified for marine applications by ABS, BV, DNV, LR, and CCS.
- Meets electrical safety requirements of EN 61010-1 and UL 61010-1.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSOperates within ABB S800 I/O stations. Mounts directly onto TU810, TU812, TU814, or TU830 Module Termination Units. Communicates across the proprietary ABB ModuleBus interface.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the channel configuration of the ABB DO810 3BSE008510R1 module?
The module provides 16 digital output channels divided into two isolated groups of eight.
Which Module Termination Units are compatible with the DO810 module?
The DO810 module is compatible with TU810, TU812, TU814, and TU830 termination units.
What is the reference price for the ABB DO810 3BSE008510R1?
Observed market reference pricing is approximately $159.00 USD for refurbished units. This figure is an indicative market reference only and does not represent a final quotation.
