PRODUCT INFORMATION
Product Overview
The ABB IPSYS01 PIPSYS01 Symphony Infi 90 System Power Module belongs to the Symphony Plus control platform. It accepts AC and DC supply inputs to generate logic and field I/O voltages. Supported supply ranges include 120 V AC, 240 V AC, or 125 V DC mains power.
The module supplies logic rail outputs of 5 V DC, 15 V DC, and -15 V DC. It also delivers an isolated 25.5 V DC output designed for 24 V DC I/O loads. Modules maintain current sharing within plus or minus five percent under full electrical load conditions. Flexible redundancy configurations include N, N+1, N+x, or 2N system architectures.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Input voltage | 120 V AC / 240 V AC or 125 V DC |
|---|
| Output voltages (logic rails) | 5 V DC, 15 V DC, -15 V DC |
|---|
| Output voltage (I/O power) | 25.5 V DC (≈ 24 V DC) |
|---|
| Redundancy support | Selectable N, N+1, N+x, or 2N power architectures |
|---|
| Current sharing | Modules share output current within ±5% at full load |
|---|
TECHNICAL INFORMATION
Features
- Delivers multiple DC rail outputs including 5 V DC, 15 V DC, and -15 V DC.
- Provides dedicated 25.5 V DC power for nominal 24 V DC I/O circuitry.
- Accepts field power inputs of 120 V AC, 240 V AC, or 125 V DC.
- Shares module output current within ±5% across active units at full load.
- Supports configurable power architectures including N, N+1, N+x, and 2N redundancy modes.
TECHNICAL INFORMATION
Applications
- Supplying regulated logic and I/O power in Symphony Plus DCS enclosures.
- Power distribution across Symphony Infi 90 racks and system cabinets.
- Redundant power architecture implementations requiring active current sharing across parallel supplies.
TECHNICAL INFORMATION
Installation Guidelines
- Mount the module within designated Symphony Infi 90 power chassis slots.
- Ensure input line voltage matches the 120 V AC, 240 V AC, or 125 V DC supply.
- Configure power backplane settings to support desired N, N+1, or 2N redundancy.
TECHNICAL INFORMATION
Configuration Guidelines
- Select the appropriate redundancy architecture prior to system energization.
- Verify load limits to maintain current sharing balance within ±5% across modules.
TECHNICAL INFORMATION
Compatibility
- Compatible with ABB Symphony Plus and Symphony Infi 90 power rack architectures.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSCompatible with ABB Symphony Plus and Symphony Infi 90 power rack architectures.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What input voltages are supported by the ABB IPSYS01 PIPSYS01?
The module operates from 120 V AC, 240 V AC, or 125 V DC supply sources.
What output voltages does the ABB IPSYS01 power module provide?
It provides logic rail outputs of 5 V DC, 15 V DC, and -15 V DC. It also outputs 25.5 V DC for I/O power.
What redundancy options does the PIPSYS01 support?
It supports selectable N, N+1, N+x, or 2N redundant architecture configurations with ±5% current sharing.
What is the reference price for the ABB IPSYS01 PIPSYS01?
Observed market pricing is approximately $1,695 USD for refurbished units. These figures are indicative market reference pricing only. They are not a final quotation.
