PRODUCT INFORMATION
Product Overview
The Allen-Bradley 1783-ETAP1F is a Stratix Ethernet/IP Tap designed for industrial automation networking. This device features two copper communication ports and one dedicated fiber-optic port. It operates as a single-port fiber tap to provide flexible network media conversion and segment connection.
The unit accepts a power supply input voltage ranging from 20.4 to 27.6V DC. Maximum current consumption reaches 200 mA at nominal 24V DC operation. Power dissipation and power consumption both measure at a maximum of 4.8 Watts. Continuous electrical isolation reaches 30 Volts across power channels and network communication paths. The tap features an open-style enclosure with basic insulation for control panel integration.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| UPC | 612598594443 |
|---|
| Weight | 1.06 lbs (0.48 kg) |
|---|
| Number of Copper Ports | 2 Ports |
|---|
| Number of Fiber Ports | 1 Port |
|---|
| Tap Type | Single-Port, Fiber Type |
|---|
| Maximum Current Consumption | 200 mA at 24V DC |
|---|
| Power Supply Voltage | 20.4-27.6V DC (24V DC) |
|---|
| Continuous Isolation Voltage | 30 Volts |
|---|
| Isolation Options | Power to network channels isolation and between network channels |
|---|
| Insulation Type | Basic Type |
|---|
| Maximum Power Consumption | 4.8 Watts |
|---|
| Power Dissipation | 4.8 Watts |
|---|
| Enclosure | None (Open Style) |
|---|
TECHNICAL INFORMATION
Features
- Provides two copper Ethernet ports alongside one dedicated fiber-optic communication port.
- Operates with an input power supply voltage range between 20.4 and 27.6V DC.
- Supports power-to-network isolation and isolation between individual network channels up to 30 Volts.
- Features an open-style enclosure configuration designed for industrial control environments.
- Draws a maximum current of 200 mA with total power dissipation of 4.8 Watts.
TECHNICAL INFORMATION
Applications
- Industrial Ethernet/IP networking architectures requiring copper and fiber media interfacing.
- Network segments needing physical isolation between power sources and communication lines.
TECHNICAL INFORMATION
Connections / Interfaces
- Two copper Ethernet ports for local device or trunk connections.
- One single-port fiber connection for optical network media transmission.
- DC power supply terminals accepting 20.4 to 27.6V DC.
TECHNICAL INFORMATION
Installation Guidelines
- Install the open-style device inside a protective industrial enclosure to prevent contamination.
- Ensure the direct DC power supply remains within the specified 20.4 to 27.6V DC rating.
- Maintain adequate clearance for fiber-optic and copper cabling bends during installation.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What port configuration does the 1783-ETAP1F provide?
The 1783-ETAP1F features two copper network ports and one single-port fiber connection.
What are the power requirements for the 1783-ETAP1F?
It requires a 20.4 to 27.6V DC power supply and consumes up to 200 mA.
What electrical isolation is supported by the 1783-ETAP1F?
It supports up to 30 Volts continuous isolation between power and network channels, and between network channels.
