PRODUCT INFORMATION
Product Overview
The Allen-Bradley 2097-F2 is a Kinetix AC Line EMI Filter engineered for industrial motion control systems. It suppresses electromagnetic interference generated along the AC power mains during operation. The unit connects directly with Kinetix 300 and Kinetix 350 servo drives. It ensures compliance with electrical noise standards in automation enclosures.
This 10.0 A filter operates on 240V AC or 480V AC input power distribution. The unit features a side-mount form factor measuring 165.6 by 35.8 by 33.0 millimeters. It mounts directly to the right side of compatible drives using M4 machine screws. Standard terminal blocks accept 14 AWG wire sizes with seven millimeter strip lengths.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Device type | AC line EMI filter |
|---|
| Compatible drives | Kinetix 300 and Kinetix 350 |
|---|
| Installation | Side mount |
|---|
| Rated current | 10.0 A |
|---|
| Input voltage | 240/480 VAC |
|---|
| Recommended wire | 2.5 mm² / 14 AWG |
|---|
| Strip length | 7 mm |
|---|
| Terminal torque | 0.5 N·m |
|---|
| Dimensions | 165.6 × 35.8 × 33.0 mm |
|---|
| Mounting center | 149.9 mm |
|---|
| Approximate weight | 0.6 kg |
|---|
| Input terminals | PE, L1, L2, L3 |
|---|
| Output terminals | PE, L1-prime, L2-prime, L3-prime |
|---|
TECHNICAL INFORMATION
Features
- Provides electromagnetic interference filtering for 240V and 480V AC supply lines.
- Rated for continuous industrial load currents up to 10.0 A.
- Engineered for side-mount integration alongside Kinetix servo drives.
- Prewired drive interface connector streamlines electrical installation.
- Accepts 2.5 mm² (14 AWG) wiring with integrated screw terminal clamp blocks.
- Requires only 1.1 N·m mounting torque using M4 steel machine screws.
TECHNICAL INFORMATION
Applications
- Mains line noise attenuation for Kinetix 300 EtherNet/IP indexing drives.
- Mains power filtering for Kinetix 350 single-axis servo systems.
- Industrial control enclosures requiring high-frequency noise mitigation.
TECHNICAL INFORMATION
Connections / Interfaces
- Input power terminal connections provide points for PE, L1, L2, and L3.
- Output terminals provide filtered connections for PE, L1', L2', and L3'.
- Connector connects to the input power header of the drive.
- Protective earth ground must be connected first during terminal installation.
TECHNICAL INFORMATION
Installation Guidelines
- Disconnect all mains power prior to handling or mounting the filter assembly.
- Check space on the right side of the drive for side-mount installation.
- Mount the filter to the drive using two M4 x 0.7 steel machine screws.
- Tighten the filter-to-drive mounting screws to 1.1 N·m (9.8 lb·in).
- Fasten the assembly to the panel using three M4 machine screws torqued to 1.1 N·m.
- Tighten input power terminal screws to 0.5 N·m (4.5 lb·in).
TECHNICAL INFORMATION
Configuration Guidelines
- Verify that local incoming voltage matches the 240/480 VAC filter rating.
- Maintain high-frequency bonding to the cabinet ground bar for optimal attenuation.
- Refer to Rockwell publication GMC-RM001 for noise control layout practices.
TECHNICAL INFORMATION
Compatibility
- Allen-Bradley Kinetix 300 EtherNet/IP indexing servo drives.
- Allen-Bradley Kinetix 350 single-axis EtherNet/IP servo drives.
- Replacement drive connector sets using catalog number 2097-CONN1.
TECHNICAL RESOURCES
Documentation
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSAllen-Bradley Kinetix 300 EtherNet/IP indexing servo drives. Allen-Bradley Kinetix 350 single-axis EtherNet/IP servo drives. Replacement drive connector sets using catalog number 2097-CONN1.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
Which servo drives are compatible with the Allen-Bradley 2097-F2?
The 2097-F2 filter is designed for use with Kinetix 300 and Kinetix 350 servo drives.
What is the mounting method for the 2097-F2 line filter?
It is a side-mount filter that attaches to the right side of the drive using M4 screws.
What wire gauge and torque are specified for 2097-F2 power wiring?
The terminal blocks accept 2.5 mm² (14 AWG) wire. Tighten terminal screws to 0.5 N·m.
What is the market reference price for the 2097-F2?
Observed market reference pricing is approximately $59.00. This is indicative market reference pricing only and not a final quotation.
