PRODUCT INFORMATION
Product Overview
The Allen-Bradley 2711P-RW2 is an internal CompactFlash card for PanelView Plus terminals. This memory card installs directly inside the terminal logic module. It provides 128 MB of Single Level Cell flash memory storage. The internal installation slot is positioned directly above the RAM module. Retaining screw clips secure the card in place inside the module.
Hardware releases range from Series B through Series J. Each card series matches specific logic module hardware revisions from Series A through Series G. The unit receives power directly from the system bus. An integrated wear leveling algorithm supports prolonged non-volatile memory endurance. The terminal environment must meet certified ratings for temperature, humidity, and pollution levels.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| GTIN | 10662073088391 |
|---|
| Weight | 0.06 lbs (0.03 kg) |
|---|
| Memory | 128 MB |
|---|
| Available Versions / Series | Series B - Series J |
|---|
| Compatible Logic Module | Series A-G logic module |
|---|
| Removal and Insertion under Power | Not supported |
|---|
| Power Supply | Bus powered |
|---|
| Wear Leveling algorithm | Integrated |
|---|
| Technology | Single Level Cell Flash technology |
|---|
| Used with | Standard Logic Module |
|---|
| UPC | 10662073088391 |
|---|
TECHNICAL INFORMATION
Features
- 128 MB Single Level Cell flash storage capacity.
- Internal bus-powered operation without external power cabling.
- Integrated wear leveling algorithm for non-volatile memory endurance.
- Retaining screw clip mounting directly above the RAM module.
- Hardware revisions spanning Series B through Series J.
TECHNICAL INFORMATION
Applications
- PanelView Plus standard logic module internal memory storage.
- VersaView CE logic module system configuration.
- Internal non-volatile operating storage maintenance.
TECHNICAL INFORMATION
Connections / Interfaces
- Internal bus interface slot positioned directly above the RAM module.
- Retaining screw clip hardware securing connection.
TECHNICAL INFORMATION
Installation Guidelines
- Disconnect all electrical power to the PanelView terminal before starting work.
- Removal and insertion under electrical power is not supported.
- Place the logic module on an electrostatic-discharge safe surface.
- Wear a grounded anti-static wrist strap during handling.
- Loosen the retaining screw to disengage the retaining clip.
- Insert the card into the slot located above the RAM module.
- Tighten the retaining screw before attaching the logic module to the display.
TECHNICAL INFORMATION
Configuration Guidelines
- Match the card series version to the target logic module hardware series.
- Verify the logic module catalog number before completing hardware installation.
TECHNICAL INFORMATION
Compatibility
- Compatible with Allen-Bradley 2711P-RP7 logic modules.
- Compatible with 6189-RPEH VersaView CE logic modules.
- Series B card matches Series A 2711P-RPx logic modules.
- Series C and Series D cards match Series B logic modules.
- Series E card matches Series C logic modules.
- Series F card matches Series D logic modules.
- Series G card matches Series E logic modules.
- Series H card matches Series F logic modules.
- Series J card matches Series G logic modules.
TECHNICAL INFORMATION
Lifecycle / Replacement Information
- Logic modules can be ordered pre-fitted with the internal card.
- Replacement requires matching card series with the corresponding logic module series.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSCompatible with Allen-Bradley 2711P-RP7 logic modules. Compatible with 6189-RPEH VersaView CE logic modules. Series B card matches Series A 2711P-RPx logic modules. Series C and Series D cards match Series B logic modules. Series E card matches Series C logic modules. Series F card matches Series D logic modules. Series G card matches Series E logic modules. Series H card matches Series F logic modules. Series J card matches Series G logic modules.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the memory capacity of the Allen-Bradley 2711P-RW2?
The 2711P-RW2 provides 128 MB of Single Level Cell flash memory.
Can the 2711P-RW2 card be removed while powered?
No. Removal and insertion under power is not supported. Always disconnect terminal power before servicing.
Which logic modules support the 2711P-RW2 internal card?
The card supports 2711P-RP7 and 6189-RPEH VersaView CE logic modules across Series A through Series G.
Where does the 2711P-RW2 card mount inside the logic module?
The card mounts in an internal slot located directly above the RAM module.
