PRODUCT INFORMATION
Product Overview
The Bently Nevada 133300-01 is a Low Voltage DC Power Input Module for the 3500 machinery protection system. This component pairs directly with the 3500/15 power supply architecture. It accepts an input voltage range between 88 and 140 Vdc. The module mounts directly behind the front power supply in designated half-height rack slots. It supplies input power conversion for machinery monitoring modules across the rack.
The 3500 system supports one or two power supplies in the left section of the chassis. When two supplies are installed, the lower position acts as primary and the upper acts as backup. Inserting or removing a power supply module does not disrupt continuous rack operation when a redundant unit is active. This low-voltage direct current module operates under demanding ambient operating conditions.
TECHNICAL INFORMATION
Features
- Accepts low-voltage direct current input ranging from 88 to 140 Vdc.
- Pairs directly behind the half-height 3500/15 power supply in the chassis.
- Supports redundant dual-supply installations with primary lower and backup upper slots.
- Enables hot-swapping of supply units without interrupting machinery protection operations.
- Operates within an ambient temperature span from -30 °C to +65 °C.
TECHNICAL INFORMATION
Installation Guidelines
- Install the module in the designated half-height rear slot directly behind its associated power supply.
- Power supply slots are located specifically on the left side of the 3500 rack.
- Verify that the incoming direct current feed matches the 88 to 140 Vdc specification.
- Ensure secondary redundant supply hardware is energized before servicing or replacing an individual supply module.
TECHNICAL INFORMATION
Compatibility
- Operates within the Bently Nevada 3500/15 power supply system.
- Legacy 3500 High Voltage and Low Voltage DC supplies and PIMs are not compatible with newer versions.
- Traditional AC devices are incompatible with universal AC power supply assemblies.
TECHNICAL INFORMATION
Compliance and Certifications
- Complies with Part 15 of FCC Rules for operational interference limits.
COMPATIBILITY
Compatibility & Replacement
COMPATIBLE MODELSOperates within the Bently Nevada 3500/15 power supply system. Legacy 3500 High Voltage and Low Voltage DC supplies and PIMs are not compatible with newer versions. Traditional AC devices are incompatible with universal AC power supply assemblies.
Verify compatibility against the exact Part Number, revision and manufacturer documentation before ordering.
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What is the primary function of the Bently Nevada 133300-01 module?
The 133300-01 is a Low Voltage DC Power Input Module for the Bently Nevada 3500 system. It connects incoming direct current power ranging between 88 and 140 Vdc to the internal power supply.
Where is the 133300-01 installed within a Bently Nevada 3500 rack?
It mounts in a half-height slot on the rear left side directly behind the power supply.
Does removing a power supply shut down the 3500 system?
No shutdown occurs if a second redundant power supply is installed and operating in the rack.
What is the reference price for the 133300-01 module?
Pricing depends on condition and availability. Stated market figures represent indicative reference pricing only, not a final quotation.
