PRODUCT INFORMATION
Product Overview
The Bently Nevada 330500-01-00 is a 330500/330525 series Piezo-Velocity Sensor. This ordering code incorporates option 01 for a 1/2-20 UNF mounting adapter. It also includes option 00 indicating agency approval is not required. The sensor provides a nominal sensitivity of 3.94 mV/mm/s (100 mV/in/s) ±5%. It supports an amplitude linearity within ±2% up to 152 mm/s peak.
The unit features a 316L stainless steel case measuring 25.3 mm in diameter and 63.2 mm in height. It delivers a wide frequency response between 4.5 Hz and 5 kHz. Operating temperature limits range from -55 to +121 °C. The assembly withstands mechanical shock levels up to 5000 g peak. An electrical connection is established through an integrated 2-pin MIL-C-5015 hermetic connector.
TECHNICAL DATA
Technical Specifications
| Parameter | Specification |
|---|
| Sensitivity | 3.94 mV/mm/s (100 mV/in/s) ±5% |
|---|
| Wide frequency response | 4.5 Hz–5 kHz, ±3 dB |
|---|
| Flat frequency response | 6 Hz–2.5 kHz, ±0.9 dB |
|---|
| Velocity range | 1270 mm/s (50 in/s) peak |
|---|
| Transverse sensitivity | Less than 5% |
|---|
| Amplitude linearity | ±2% to 152 mm/s peak |
|---|
| Mounted resonance | Above 12 kHz |
|---|
| Maximum cable length | 305 m |
|---|
| Operating temperature | -55 to +121 °C |
|---|
| Shock survivability | 5000 g peak |
|---|
| Humidity | 100% non-submerged; hermetically sealed |
|---|
| Weight | 142 g typical |
|---|
| Dimensions | 25.3 mm diameter × 63.2 mm high |
|---|
| Case material | 316L stainless steel |
|---|
| Connector | 2-pin MIL-C-5015, hermetically sealed |
|---|
| Maximum mounting torque | 46 kg·cm (40 in-lb) |
|---|
| Mounting adapter | Option 01 — 1/2-20 UNF |
|---|
| Agency approval | Option 00 — approval not required |
|---|
TECHNICAL INFORMATION
Features
- Delivers a calibrated sensitivity of 3.94 mV/mm/s (100 mV/in/s) ±5%.
- Provides flat frequency response from 6 Hz to 2.5 kHz within ±0.9 dB.
- Measures vibration velocity levels up to 1270 mm/s (50 in/s) peak.
- Features a hermetically sealed 316L stainless steel body.
- Withstands mechanical shock events up to 5000 g peak.
- Maintains transverse sensitivity below 5% of on-axis response.
TECHNICAL INFORMATION
Connections / Interfaces
- Connects via an integrated 2-pin MIL-C-5015 hermetic connector.
- Supports transmission runs across maximum cable lengths of up to 305 meters.
TECHNICAL INFORMATION
Installation Guidelines
- Install the sensor using the Option 01 1/2-20 UNF mounting thread adapter.
- Tighten the housing to a maximum mounting torque of 46 kg·cm (40 in-lb).
PART VERIFICATION
Before You Order
Industrial automation parts can share similar model names, suffixes and revisions. Confirm the complete manufacturer Part Number before purchase.
01Check Part NumberMatch the complete ordering code on the existing unit.
02Confirm RevisionCheck suffix, hardware or firmware when applicable.
03Send a Label PhotoWe can review a clear label photo when identification is uncertain.
ORDERING PROCESS
From RFQ to Dispatch
1Submit Part Number2Verify Product Identity3Confirm Stock & Condition4Issue Quotation5Dispatch & Tracking
PRODUCT FAQ
Frequently Asked Questions
What mounting adapter is included with the 330500-01-00?
The 330500-01-00 includes Option 01, which provides a 1/2-20 UNF mounting thread adapter.
What is the sensitivity rating of the Bently Nevada 330500-01-00?
The sensor provides a calibrated sensitivity of 3.94 mV/mm/s (100 mV/in/s) ±5%.
What electrical connector is built into the 330500-01-00?
The sensor is fitted with an integrated, hermetically sealed 2-pin MIL-C-5015 connector.
What is the maximum cable length supported by this sensor?
The maximum supported field cabling length is 305 meters.
